Where on the kingston usb data traveler 4gb circuit can I find the write protection switch. Can you send me a schematic diagram of its position and how to switch it. thank you

Format it with NTFS format

Try this link to format a write protected usb drive. http://techsalsa.com/solution-to-remove-write-protection-from-usb-pen-drive/

if there is a switch on the side that changes colour from white to red that is the write protect, you may also have reached the capacity of writes to the card and this is also why it is saying write protected as it cant write to it anymore. These flash drives do have a high amount of writes for its life, but if you have been using it as a memory booster for vista or win 7 then those read and writes will soon mount up.

Kingston Data Traveler2.0 USB Device 4gb write protected remove cannot remove write protected file from usb plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz send me this solution
email addres- [email protected]

Check this solution:

http://www.fixya.com/support/t7089647-nikon_camera_says_memory

go to this link http://www.softwarepatch.com/utilities/kingston-traveler.html

Check the switch on the side.

You need to key in the password in order to gain access to your flash drive. If you forgot it, then reformat your drive.

Found this on Kingston site, doesn't help much but may point you in the right direction.

Unfortunately this unit does not have any security or write protection feature. If you receive a write protection message with this drive, check for the following:

1. Verify that you are allowed to write to removable storage devices. There may be a security setting in the OS that disables write access to removable storage devices.
2. Make sure you have not enabled write protection on the drive by using a third party software.
3. If none of the above apply, the drive may be defective.

You just plug it into a USB port and your computer will automatically detect it.


Please rate this solution and thanks for using FixYa