How to turn on date stamp - Canon IXUS 860 IS Digital Camera

To set the date and time on your camera, follow these steps:

Turn on the camera and set the language and date/time by following the instructions in the Extended User Manual.
Once you have set the date and time, you can turn on the Date Stamp feature by following the instructions in the User Manual . The date and time will be stamped on all pictures taken with this feature enabled.
KODAK CD82 - EXTENDED GUIDE EXTENDED USER MANUAL Pdf Download ' ManualsLib

KODAK EASYSHARE CD82 USER MANUAL Pdf Download ' ManualsLib

If you do not want the date and time stamp on future pictures, turn it off:

1. Press the Menu button.
2. Use the arrows to:
   1. Select the Setup menu.
   2. Select the Date/Time Stamp feature.
   3. Turn off the Date/Time Stamp feature.
3. When you are finished, press the OK button.

If you do not want the date and time stamp on future pictures, turn it off:

1. Press the Menu button.
2. Use the arrows to:
   1. Select the Setup menu.
   2. Select the Date/Time Stamp feature.
   3. Turn off the Date/Time Stamp feature.
3. When you are finished, press the OK button.

You didn't give the model number of your Coolpix, so I can only give you general instructions. Explore your camera's menu. Somewhere, you will find an item that will allow you to turn the date stamp on or off and set the current date and possibly the time.

If you want a date stamp on photos go to Menu and turn on Date stamp after setting proper date under time and date setting under Menu. Rich

Follow these steps:

1. Press the Menu button.
2. Select the Setup menu.
3. Select the Date/Time Stamp feature.
4. Turn off the Date/Time Stamp feature.
5. Press the OK button.

If you find my solution helpful, you're kindly requested to rate it. Thanks!

The menu on the camera controls the date and time stamp. Turn on the menu i camera mode, there are three choices, Camera, Settings and customize. Time stamp should be in the middle menu. Look for time settings and turn it off. All pictures have time and date always. The time/date stamp just makes it visible in the image.

The date stamp only works in "Postcard" resolution. Press the Func Set button, then scroll down to the bottom to select postcard resolution.
Then press the menu button. The date time stamp selection should now work. Simply turn it on.

Date stamp is only possible when you set the resolution (picture size) at "Postcard 1600x1200" option, if the date stamp is set to "Date & Time" or "Date" option

In order to get the date stamp on the pictures, the resolution/size has to be set to "Postcard". Look at the menu and you will see L, M1, M2, M3, S, and Postcard. Then you can turn on the date stamp option.