Hello, I am trying to change the time on our Avaya partner 18D telephone but i cant figure out. any help would be great thanks

The Avaya 3158-05 does not have a display. It can't show the Caller ID information from the telephone provider. The Avaya 3158-07 PARTNER 18D or the 34D will display Caller ID information if your system is connected to a telephone line. (One of these modules: 206EC, 308EC, or 400EC, is required. If you have a T1 line, you can't get Caller ID.)

I hope this helps.

Cindy Wells

Mute the speaker, mute the ringing?

Press Feature 00 (zero, zero) from station 10 or 11. Press left intercom button twice, press #103, and then enter time in military format (24 hr). Press feature 00 again. This is all done with the handset down.

Avaya Partner 18D Button phone:
Two possible solutions,
First, could have a bad handset cord.
Second, I have come across a bad handset connection ports on the Euro style phones. The handset cord and the port just don't mesh well or the port itself is bad.

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#101"
the display should say system date and the current programmed date.
enter the new datein MMDDYY format
press feature "00" to logout

Older partner systems also had an additional place to program the system day
feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#102"
the display should say system day.
the display should have the current programmed day of the week
press the digit for the day of the week (1=sunday 2=monday etc.)
press feature "00" to logout

I'm kinda new here, but why doesn't anybody say WHAT SYSTEM THEY HAVE????? It's kind of like saying I got a GM car. Uh..... Corvette or is it a Lumina?

ANYWAY, I'm presuming a Partner.

You better hope the previous guys left you the password.

Go to a station, dial 777 to get to the VM.
99# should prompt you for the password. Try 1234 or 1111.
If you get in, just listen for the prompts to guide you.
Good Luck

Those are pretty easy requests. At extension 10 or 11 go to the phone and press FEATURE 00 LIC LIC (where lic is the left intercom button) #103 and dial your time in 4 digit military time. If you need the date its #101. Press Feature 00 to exit.

Manuals are always available for download at www.avaya.com and you have to search for them. I also have one on my public website at http://public.carl.airpost.net/Avaya/Partner_ACS.pdf

This is for an ACS 4.0 IIRC. It works for most applications.

Carl

Power the system off and after about 10 seconds power back on. This usaully clears the problem. Let me know if there is still an issue.

It's the gray button labeled FEATURE just to the left of the #1 on the keypad.

Are you trying to change if it rings or how it sounds when it rings?

The phone you have (Partner 18D) can be used on several different Avaya phone systems that all program differently. To change when it rings, this would need to done in the system programming (not the phone) All the manuals are avaialble on Avaya's web site but you need to know which system you have before you can start searching. www.avaya.com