Need CapturePerfect 3 driver for Canon Scanner DR 9080C

Hi glendennib
Here is the place where you can download and install your driver from :
http://usa.canon.com/cusa/support/office/imageformula_scanners/imageformula_dr_6080_7580_9080c/imageformula_dr_9080c_color_production_scanner#DriversAndSoftware
Best regards ,
fanaudi .

You need CapturePerfect version 3 to run it. CP3 has quite lot of features for easy scanning. It is not available free on the Internet. CapturePerfect2 version is available at
http://software.canon-europe.com/software/0022439.asp?model=
but this has limited features.
S. Mohan, Chennai, India

Use CapturePerfect ver 2.0 downloadable free. Ver 3.0 is priced. http://software.canon-europe.com/software/0022439.asp?model= though this is under Canon 5020, it works with 9080C.
Have you loaded Device drivers, if not download from http://software.canon-europe.com/products/0010035.asp
Once the driver is loaded you can even use Microsoft Imaging to scan. CapturePerfect is easy and brings out the added features of Canon 9080C.
S. Mohan, Chenai, India

CapturePerfect ver 3 is on chargeable basis! You can download ver 2.0 from http://software.canon-europe.com/software/0022439.asp?model= Though this is listed under Canon DR 5020, it works fine with DR 9080C. DR 9080C has very intelligent features and ver 2 works fine. I do not know if there are addl features with ver 3.0. I have used for scanning over 500,000 docs.
S. Mohan

You are right, it is driver related issue. Acobat 9 has more features that may not be compatible with the existing driver. may be you can use CapturePerfect and directly create PDF and then use the Optimising features of Acrobat 9. Ofcourse you have to do it twice, but you can use the 'batch' process and do it automatically.
S. Mohan

CapturePerfect is a good software. What version are you using? What is the problem. It is easy and meets general requirements. The only problem I found with CapturePerfect is that it does not accept changes made in settings, you need to go todefault and then select the settings of your choice.
If you have installed the driver, you can also use Micorsoft Document imaging for scanning. S. Mohan

Try in install captureperfect in Admin mode and give full rights and select the setting you want. Log off and get into user mode and try Captureperfect. This can work. If there are not too many variations in settings required, the best is to select Autocontrast option, but you may get a samll black patch on the top.

Captureperfect 3 is not available on the Net. Only version 2.311 is available. (It may also be called upgrade) Download this and this can meet yr basic requiremnts. http://software.canon-europe.com/products/0010035.asp

The upgrades wont work without ver 3.0!

S. Mohan 94441 66426

I purchased Canon DR 9080C scanner two years back but the CapturePerfect 3 not received. So speed is slow. Can Canon Big help me to provide capture perfect 3 software. My email is [email protected]

I have not used CapturePerfect 3.0. Hope the scanner is just fine. Try count only mode to check if it is okay.

Uninstall Captureperfect. Run chkdsk/scandisk to check if OS is ok. Reinstall Captureperfect again and it should work.

S. Mohan