I have an older model of magic chef electric oven, not sure on the product number, but three of my burners are not working and i am wondering where the fuses are located? I know you can usually just lift the back but when i took it off it was all wiring to the control knobs, would the fuses be in the panel below that?

Try them direct

Manuals - Magic Chef

https://mcappliance.com > manuals
Manuals. Product Type: - Select -, Cooking Appliances, Cooktop, Dehumidifier, Dishwasher, Disposer, Freezer, Ice Maker, Laundry, Microwave ...
Missing: 458W - ‎44CLW

• 
  

  Home - Magic Chef

  https://mcappliance.com > magic-chef
  MC specializes in compact and small kitchen appliances including microwaves, refrigerators, dishwashers, and washers & dryers under the Magic Chef®, ...

Possible locations shown in article at the web link below:

https://www.hunker.com/13409112/how-to-find-a-model-number-on-a-magic-chef-oven


How to Find Model Number on Magic Chef Oven Hunker


Quoting the link above:

Step 1 Open the oven door. At the top, left-hand corner of the open oven, locate the model number tag.
Step 2 Check under the burners. Lift each burner on the stove off to see if the plate is underneath. Do this if the plate is not located on the inside of the oven.

What is the model number?

hope this helps a little...
https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Range-Stove-Oven/15-104--/Magic-Chef-Stove-burner-won-t-light

Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

25 yr old oven...........so I bought a new one with a few blemishes for $200.

Hi,look in the control console for the tech sheet or under the top of the unit.A good place to start.Hope this helped.

I couldn't find your manual on Magic Chef's site - are you sure you copied the number correctly?

Magic Chef Customer Service will probably be able to help you and can be reached:

Customer Service: 800.688.1120
Canadian Customers: 866.587.2002 Magic Chef Customer Service
553 Benson Road
Benton Harbor, MI 49022

check all wires to burner and switch. If they are good .....burner burnt out or switch no good.

Hi, If the oven has a standing pilot too, Open the bottom door and locate the main burner. Follow the burner toward the rear of the oven and there will be a flame switch attatched to the burner. Hold the flame near the flame switch and the gas should ignite.
Some model do not have a standing pilot in the oven. Please get me your model number off the label located around the opening of the lower door so I can look this up and instruct you better.

Vic