Hansgrohe faucet part-no. 92730000 faucet cartrige installation instructions

The 14010 faucet does not have any adjustment for handle tension. It uses a cartridge to control the on/off functions. If it is hard to turn on and off it may mean the cartridge has debris in it or has worn out over time. You may need to replace the cartridge. This should be part number 92730000. List is $48 and it is available through your local dealer or online dealer. If you need further help feel free to contact Hansgrohe Tech at 1-800-334-0455.

The first thing to do is identify the faucet. If you do not know the model number the best way to identify is to send me a picture of the unit in question as it is installed. Feel free to send me a picture of the faucet to my email address at [email protected]. I'll be happy to help identify the unit and/or provide instructions for repair.

Most likely you will need a replacement cartridge to resolve a constant drip. This model uses the M2/M3 cartridge part number 92730000. It is available through your local dealer or online dealer. If you need further help feel free to contact me at Hansgrohe. 1-800-334-0455. Press 2 for tech and ask for David Scarborough. I'd be happy to help.

On the 35807801 there are generally only two causes of a leak. If the faucet does not seem to shut off and constantly drips it will most likely be the cartridge. This will be part number 92730000. If the faucet is leaking around the sprayer or below the sink the most common cause is the pull out spray hose. This will be part number 88624000. If you need further help locating the parts or a dealer feel free to call Hansgrohe Tech at 1-800-334-0455.

This is most likely a cartridge that has worn out and needs to be replaced. Most of the kitchen faucets use cartridge number 92730000. This is available through your local dealer or online dealer. If you need further help feel free to contact me at Hansgrohe 1-800-334-0455. Press 2 for tech and ask for David Scarborough.

The cartridge should come with instructions on replacement. The part number for the cartridge is 92730000. It is available through your local dealer or online dealer. If you need further help with obtaining the cartridge or installation feel free to give me a call at Hansgrohe. 1-800-334-0455. Press 2 for Tech and ask for David Scarborough. I'll be happy to help.

If the handle is hard to turn it is most commonly caused by water deposits in the handle or in the cartridge below. I would try removing the handle to ensure it turns freely when not installed on the faucet. If not you can clean it with CLR to remove the water deposits that are making it difficult to turn. If the handle turns freely when not installed you will need to remove the cartridge and inspect it to ensure it is not broken or damaged in any way. There could be debris in the cartrige that has either made it hard to turn or broken the ceramic disks. Our handles are easily removed by turning the bell shaped ecutcheon below the lever or cross handle. There are not set screws that hold them on. If you need further information feel free to call me at 1-800-334-0455. Press 2 for tech and ask for David Scarborough.

You should contact your hansgrohe customer service hotline found on the installation book. They will help you solve the problem.

Handle:

http://www.hansgrohe-usa.com/JP/hruh0151.pdf - This appears to be the same hardware that's included in the Monsoon Tub / HS Set

Showerhead:
http://www.hansgrohe-usa.com/us_en/26279_31353833335F32375F3436383138.htm

Faucet:

http://www.hansgrohe-usa.com/us_en/26207_31353734325F32375F3530333837.htm

Behind the handle there is usually a scald gaurd on the newer faucets. You can adjust it from there. If your not sure, follow this link and download the installation instructions to your faucet. There you will find how to adjust it step by step. http://www.hansgrohe-usa.com/us_en