Water witholding container, the BLADDER separates / colapse in container, so that water leaks out quickly before I can start machine.
Is it possible to order a bladder replacement? L
My bissell does not spay out water
Depending on the model yes:
Google turned up several sites -
http://www.svcvacuum.com/bissell/tanks.htm
You can also look at Bissell www.bissell.com
Inner bladder is needed to hold the fresh water for spray. Make sure the bladder is pulled through the bottom of the tank and that the black cap with a red rubber seal on the bottom of the tank.
If the black cap is missing you'll need to purchase a new one. Here's a quick link.
http://www.bissell.com/parts/?id=9143&sc=product&productid=2813&cid=ccsocial
Here's a quick link to locating a BISSELL Authorized Service Center if you need more assistance.
1,508 views
Usually answered in minutes!
I have the same problem and unfortunately all of the forums that I have read say that the "Bladder" is uncapable of handling HOT water it can only handle WARM water or the neck of the bag will deform and you will have to purchase another one at a cost between $25 - $40 + S/H . So for this I give Bissell a BIG NEGATIVE for this product, I wish they would have never gotton away from the older models that connected straight to the kitchen faucet for fresh water !
flex hose has low to no suction/model 3910
bladder leaks no matter how I try to fix it. I only used the machine 2 times before the problem started
×