To remove paper jam. Just remove the toner cartridge and pullout jammed paper. If still coming paper jammed error message. Switch of the printer and the printer will roll over the paper jammed.
Changing of fuser drum is required if the print out came with the black strips. This happens when you print large volume of printing jobs.
SOURCE: Phaser 7300 Jam at Fuser
Xerox Jam at Fuser.
Do not buy this product. I own two and once you buy it xerox could care less about you as a customer. One of mine has jammed EVERY three pages, wasting a ton of time, paper, ink, etc because it starts over each time. It has been sent in for repair once already. Now I got the below response today from xerox.
Hello Craig,
We have received your request for support.
If you have tried on the online troubleshooting steps you will require a service call. Currently our records show you machine is not under contract, and our billable rates are $332.00 for the first 30 minutes and $61.00 for every 15 minutes there after plus applicable taxes. A credit card which would be preauthorized for $900 not billed until service completed and then would be billed the total amount of the
service call only. I have also copied and pasted a link below where
you can look for an Authorized Service Provider in your area as well.
Regards,
Tammy Field
North American E-mail Support Team
Xerox North America (XNA)
SOURCE: Error 13.20.00 on HP laserjet 5200 jam inside top
This is a common issue and most times a bear to repair. There is a
sensor flag mounted on the paper feed assembly behind tray 1 which has
a habit of either coming off or the spring which moves it back a forth
comes out of its holder. In any case it is one of the worst repairs you
have to do. Many items have to come off to get to it and getting that
flag and spring on correctly even with the instructions is difficult.
Usually what will happen is you get the 13.20.00 error on power up with
no motor movement and when you open and close the top cover, the motor
will move but the same error reappears. If you are lucky it is just a
case of a shred of paper blocking the sensor flag from moving and worst
case of the flag having come off. You will need the service manual and
check the removal and replacment section on the paper feed assembly and
play close attention to the 3rd page.
sometimes this error also appears if a wrong fuser is installed in ur printer that is not ur model number.... have it checked
thank you
have a nice day
Testimonial: "Good answers - unfortunately still no closer to solving the problem."
SOURCE: 13/20.00 jam inside top cover message and have
Hello there
Ok try this may cleaer it.
This may work for you, it has worked for many here I given this advice so gave it a try it could work for you.
Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
SOURCE: A HP Color Laserjet 3000n has the following errors
Perry,
Usually I have found that there is a scrunched up piece or bit of paper in the fuser.
I am adding a link below that will take you through the step-by-step process and you should find the source of the problem. Be careful when touching the fuser that thing gets HOT!!
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00506722
Please let me know if this has helped and if i can help you any further.
Thanks
Fixed! 
Did not fix.
TRY FIRST (Solutions without parts):2,578 views
Usually answered in minutes!
×