Question about Nu Mark Numark (CD2CD) CD-RW Burner

2 Answers

Fix i can't open the door of my cdmix1 numark. I push the function: "cue" and "open" at same time. Can you help me please? thanks for your attention.

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

CD got stuck inside? -or the drawer had a knock and the motor can't drive the door open. Rip the covers of and check. If no CD stuck press the open button and give the drawer some help to open. If it doesn't move it could be motor or drive circuit. hopefully it tries to open. If it does open it fully and check the drawer is square to the unit. You may be able to pull the drawer square (worked on my CDN-88's and all in one mix unit!).

Posted on Jan 04, 2009


  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers

Ok restart the cdmix1 it ll work..

Posted on Jun 23, 2008


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

When pressing the cue button on ndx400 all functions gets activated

did u fix this issue im havin the same trouble could u email me with a solution if u have 1 that wud be good my email is

Dec 12, 2012 | Numark Industries Numark NDX400 Tabletop...

3 Answers

Ok i just purchased my idj3 and installed all the software it camre with. Once you open software and hook up usb nothing works the lights come on but only the keylock on both and a cue and b cue and none...

Make sure you install the software in the CD provided with the iDJ3. IF you already have, try to uninstall, restart and then reinstall. Sounds like the drivers for your device was not properly loaded to your PC which cause it not to recognize. If it still doesn't work after that, I suggest that you contact Numark tech support for further troubleshooting at this link:
Good luck and vote this solution if it helped you. Cheers

Mar 08, 2011 | Numark Audio Players & Recorders

1 Answer

Hallo i need serial nuber for numark cue le version 5

If you have bought the software, then you should either contact the support at Numark or at Virtual DJ. Numark CUE is based on VirtualDJ therefore contacting them would be a great idea.

Here are some links that might help you in the process:

Nov 16, 2010 | Numark CUE 5 Professional DJ Full Version...

2 Answers


This information is with the software that was received upon purchase. If you registered the software after purchase the manafacturer may have this information on file, and they maybe able to provide it to you. Otherwise you may have to purchase a new serial key/ software for them.

Apr 20, 2010 | Numark CUE 5 Professional DJ Full Version...

1 Answer

Numark tt1625 speed issue

hi nikki,

when you say ages to get back to speed how long is that exactly? even on my technics for cueing i give a slight throw to hit my cue points.
also your slip mat may be an issue. do not use the rubber mats use the soft nylon foam one that came with it only.

Feb 27, 2009 | Numark BATTLE PAK v.4 Turntable

1 Answer

Numark cue mixing

to change headphone track, use the cue slider which is located on the right of the control panel above the right chanel treble control and below the cue gain control. chanel 1 or 2 can be selected or in the middle for a mix of both tracks just like the cross fader.

Feb 24, 2009 | Nu Mark Numark Dxm06 DJ Mixer With 12...

1 Answer

Play and pause button does not work

More than likely the button switches are damaged and need to be replaced. The CDMix1 is a very bad unit, chock full of issues. We wont even bother working on these anymore. This includes the CDMix 2 and CDMIX 3.

You might have to contact Numark directly for repair assistance on this one -

- OPTiC.
Digital Analog Therapy

Nov 02, 2008 | Numark TTX1 Turntable

1 Answer

Numark cd mix 1

The buttons usually wear out, open unit and replace the buttons.

May 14, 2008 | Nu Mark Numark Cd-Mix-2 Dual CD...

Not finding what you are looking for?
Nu Mark Numark (CD2CD) CD-RW Burner Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nu Mark Computers & Internet Experts


Level 3 Expert

13434 Answers


Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Nu Mark Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides