Follow these steps to adjust the time :
Step 1. Press and hold MODE for 2 seconds and then release. The watch will be in alarm mode.
Step 2. Press mode again to enter time mode adjust.
Step 3. Press the stop button to cycle through what you want to adjust.
Step 4. Press the reset button to adjust the actual item.
Step 5. Press MODE to exit time setting mode.
Hope this helps
mine remained 2 mins slow but still thanks for the info
×
1) Press and hold mode for about 2 seconds and then release. You will now be in the alarm edit mode.
2) Press mode once more and now you are in time edit mode.
3) Use the stop button to select what to edit, i.e. hour minute, etc.
4) Use the reset button to make the changes once you have selected the hour/minute, etc. that you want to change.
5) Press mode to stop
Good Luck
Get a heavy hammer, and smash the thing, it will be the only joy you'll get from this pos.
SOURCE: Bijoux Terner
If you are having trouble setting the watch there could be an issue with the movement itself! I suggest taking to a watch repair business and having them take a look. If the movement is bad it shouldnt cost too terribly much to replace it.
34,450 views
Usually answered in minutes!
Again, I have a WR30M watch with 4 buttons to push, Light, Mode, Start, Reset. How do I set the time and date on the watch.
It gose back to 2:57
HET LUKT NIET
get a hammer, and just let loose, that will be the only benefit you'll get, lmao.
×