Vista 32 OS problem..Windows Media Player 11 stopped working

Hello Joshua,



Instant DVD Recorder 2.6.1 UPDATER

• Please install the Instant DVD Recorder 2.6.1 UPDATER if you are using the Dazzle DVD Video Recorder, Dazzle Video Creator or Dazzle Video Creator Platinum with a previous version of Instant DVD Recorder. This updater also includes the hardware drivers.
• If you are using a Dazzle product already that includes Instant DVD Recorder version 2.6.1, then you do not need to install this update.

New with this version:

• added support for Windows Vista 64 bit and Windows 7 (32 & 64 bit)(
• Includes Windows Vista and Windows 7 drivers (for both 32 and 64 bit) for the DVC 100, 101, 103, 107 hardware NOTE: DVC130 and DVC170 don't have 64 bit drivers and can only be used with Windows XP and Windows Vista 32)
• 16x9 detection
• PCM Audio (already included with Instant DVD Recorder ver. 2.5)

Supported Hardware:

• Dazzle Video Recorder ( DVC90) - Windows XP and Vista 32 bit only
• Dazzle Video Creator ( DVC130) - Windows XP and Vista 32 bit only
• Dazzle Video Creator Platinum ( DVC170) - Windows XP and Vista 32 bit only
• Dazzle Video Creator ( DVC100 and DVC101) - Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• Dazzle Video Creator ( DVC103) - Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• Dazzle Video Creator Platinum ( DVC107) Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• and other compatible hardware

Installation Instruction:

• To be able to install this version, you must own an Instant DVD Recorder Version 2.x full version
• To install this Instant DVD Recorder version not as an update but as a full version you need to enter your Instant DVD Recorder Version 2.x serial number during the installation process. The serial number was included in your Dazzle product.
• With Windows Vista 64 bit or Windows 7 64 bit, you need to install Instant DVD recorder 2.6.1 as a full version.
• If you own an Instant DVD Recorder Version 1.x full version, to only install Instant DVD Recorder 2.6.1 full version.
• If you use this Instant DVD Recorder Updater to update the Instant DVD Recorder included with Studio Version 12, 11 or 10, please make sure that Instant DVD Recorder is already installed on you system. Please note that the version of Instant DVD Recorder included with Studio Version 12, 11 or 10 can't be installed under Windows Vista 64.

For Windows XP

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250


For Windows Vista 32 Bit

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

For Windows Vista 64 Bit

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

For Windows 7

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

Hi there,
I would like to suggest that you attempt to download & install the codecs that your media player requires, before it will play a DVD.
I found this typical when I was using the Vista operating system with Windows Media Player 11.
The codecs can be found as freeware online & a good site for the apt codecs for WMP 11 is @ www.majorgeeks.com once you are on the site, click multimedia on the left of the page, then scroll down to the codecs required.
The K-Lite series of codecs seem to work well with WMP 11 on Vista.
I truly hope that this has resolved your problem, as there is nothing better than watching a fine movie on the old PC.
Failing my advice, you could always 'Rip' the said movie to your media player & view it from your hard drive.
Good luck anyway.
Warmest regards,
Ste

install media player again or try to update your os by microsoft.com this might work

Hey,

you need media player 11 or newer
http://www.microsoft.com/windows/windowsmedia/player/11/default.aspx

it should work fine instantly with media player 11 installed, just plug it in ones the media player is properly installed (you may need to restart, I don't remember for sure)

and it should work right away with wm11.

Let me know if you need anything else.


Thanks,
Ekse

why my windows media burn list isn't burning a cd

See the FAQ here - http://www.sansa.com/support/sansa_view/faqs

The most common reason for this problem is not having the latest Windows Media Player installed, or having a Windows OS version that is not supported by the Sansa player.
The Sansa players support Windows XP SP2 and Windows Vista and above. If your operating system version is supported by the Sansa player:
SOLUTION 1 – Download and install the latest Windows Media Player

SOLUTION 2 – If that didn’t help, and you are running Windows Vista, apply the following hotfix - KB940199
SOLUTION 3 – If that didn’t help, download and Install the MTP Porting Kit (click here)
SOLUTION 4 – If that didn’t help, try connecting the device to the PC using MSC mode

View/c200: Turn on & press and hold the rewind button while plugging into the PC

download windows media player here:

Windows Media Player 11

Windows Media Player 10

From what? more details please.

There is no known software compatibility with adobe premiere and vista. The problem will be that you might have changed any setting in vista for thumbnails. I know vista is much different than windows. So, have a look around at the settings.

yay I found a solution! so I kept getting the error about an MTP device, so I did a big search. I am running vista on a 32 bit processor. what you need to download is the MTP installation programme from windows. so click on http://support.microsoft.com/kb/939211
and then just select what processor speed you need. should do the trick! I also downloaded http://www.microsoft.com/downloads/details.aspx?FamilyId=A2E73160-E862-4F19-BB26-C0CAFE798955&displaylang=en initially, but it didn't appear to work. hope that you all get to the bottom of this frustrating problem :)