Benq-q7t3 no picture

hi sir,
please don't be worry about it,
now you got the 18 numbers, it will be enough, only need you to call BenQ customer service, and tell them those number, they will solve with your trouble.

You don't need a driver. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as iPhoto on Mac or Windows Photo Gallery on Windows.

Follow the directions on this site:

http://www.gilsmethod.com/how_to_resolve_unknown_device_problems

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/larry_1fe25e09c54eece2

usually the back of some monitos come togerther by preassures clips , you can use an screwdriver (flat) or there is a plastic tools that looks like the tool that you used for remove old paint from the walls , so them stick the tools between the plastics cover and with caution force to open a litter bit at the time , possible you will brocke some of this clips but that happen all the time , best regards italocub

Hi...there,

So, this Q7T3 LCD Monitor have a power brick (AC Adapter)??? If yes, check to see if it still lite green. If no, then your backlight inverter need to replaced or repaired. Have a nice day!

try to change ur power

how can i install my benq c500 webcam in my pc

I wonder if this has a backlight in it. Most/or all LCD flatpanel displays use a backlight in them, namely a small florescent tube (a tiny version of the office florescent lights). If this is burn't out, or the little power supply which runs it dead, you will have a black display. The image is actually there, you just can't see it, except perhaps faintly when external light hits it just right. The display must be disassembled to check this light. If you have tech savvy, and some equipment, voltmeter, maybe an oscilloscope, you could check it out. Where to get a replacement lamp? Google it... perhaps the manufacturer.

http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/Benq/BenQ-5000-Mirascan-Driver-6350001.shtml Go to that web page above and download those drivers and install then your scanner should work.. You need to install a compatibl;e Vista driver