Scanner error on Artisan 700 - Epson Artisan 700 InkJet Printer

Download WIC Reset Utility - Free - 2Manuals.com

www.2manuals.com > ... > WIC_RESET

Operation Systems: Windows XP, Windows 7, 8, 10, Mac OS ... THE WIC ResetUtility WILL RESET Your Epson Inkjet Printers WASTE INK COUNTERS ... 700, Artisan 710, Artisan 720, Artisan 725, Artisan 730, Artisan 800, Artisan 810, Artisan 830, .... Q.: If I buy 5 RESET KEYs I can use them for different printer models?

WIC Reset Utility - Reset Epson printers Waste ink Counters

wic-reset-utility.blogspot.com/

Oct 5, 2014 - Artisan 720.725\Artisan 730\Artisan 800\Artisan 810\Artisan 830 .... If I buy 5 Reset Keys CAN I use them for different printer models? .... The Windows 7 WICReset Utility - for Waste Ink Pad Counter reset - Service ... Reset epson printer protection counter using ssc service utility, reseter epson r220 [...]

Printer Manual: SSC Service Utility for Epson Stylus Printers

printermanua.blogspot.com/2014/.../ssc-service-utility-for-epson-stylus.h...

Feb 22, 2014 - Problems with Epson printer, the red and greenness lightheaded ...

The products that uses the T099 ink cartridges are the following:

• Artisan 700
• Artisan 710
• Artisan 725
• Artisan 730
• Artisan 800
• Artisan 810
• Artisan 835
• Artisan 837

If you are getting a 'carriage jam' error as soon as you turn on your Epson printer with no tasks in progress, then check for any piece of paper stuck in the carriage. Remove the paper carefully. If the paper tears, part of it might remain inside the paper path and damage the product.

Fix 'Carriage Jam' : Open Door, clear carriage jam,
and then press OK to continue' error message
Turn off the printer and open it to see where the paper is stuck.
Manually move the carriage toward the opposite side.
Check the paper path and remove any piece of paper or any other object that is stuck in the path.
Reconnect the power cord and turn on the printer.

Source : EPSON support

when I turn my printer on (Epson Artisan 700 series printer) it waits for about 5 to 7 seconds and then displays a message that says "A scanner error has occured. Please see your documentation". Then all the lights start flashing, And then I cant do anything, but turn the printer off.

I have turned it off and unplugged it and tryed again always same result.

[email protected]

try to reinstal the driver ,first unistal it

Hello,

The internal memory included in the printer maybe damaged.

Maybe the image you try to print is too big and the memory of the printer does not admise this size of files.

Thanks.

If you mean it comes up with a paper is jammed in the product error message when turned on, AND you have confirmed that there is no paper anywhere to be found inside the product, then you most likely have a defective sensor or electronic problem inside the unit that is not economically feasible to repair. Epson's web site is not at all helpful for this problem.

hi there, il be glad to assist you.

If multiple pages feed at once, remove the paper from the tray, fan the edges to separate the sheets, then reload it. if Paper Jams Inside the Artisan 700 Series: Open the scanner. Remove the paper as shown, including any torn pieces. Squeeze the hooks and remove the cover inside the Artisan 700 Series. Remove the paper as shown, including any torn pieces Reattach the cover. Close the scanner. if after doing all of these still same issue persists, if the issue persists, call epson to get a replacement printer if the product is still 1 yr. from the date of purchase, if it is more than a year, most probably, thats out of warranty,

You need to download the Epson Scan software from Epson support web page http://www.epson.com (sorry, I cannot give you a direct link to the software since Epson uses session encoding in the URL).
The official name of your device is "Epson Artisan 700 All-In-One Printer", I assume.

With Epson Scan installed on your PC,any TWAIN compatible application should be able to use the scanner.

From what I've seen so far on the web (and what the user guide tells me) the printer needs to be repaired. I've got the same problem w/an Artisan 700 that has had ***very*** light use.