I have a Sony Bravia TV I cannot get display off screen AV5 arrow 5 1080i/50 Stephen

Turn on your Sony Bravia.

Press and hold the Up Arrow button on the remote control

Press the Power button on the TV while still holding down the Up Arrow button. The TV will turn off and then turn itself back on.

Release the Up Arrow button. Once the TV turns itself back on, it will restore your Sony Bravia to its factory settings.

http://www.ehow.com/how_5855646_reset-sony-bravia-tv.html

Power off the television. Wait a few minutes, then power it back on. If this does not correct the issue leave the power on, point your remote control towards the Sony television and hold the down arrow button. While holding the down arrow button press the "Power" button. Release the down arrow button and the Sony TV will reset itself to factory settings. Once the television performs a scan on itself your problem should be gone.
Good Luck Ed Pinero

Read more: How to Troubleshoot the Standby Indicator Flashing on a Sony TV ' eHow.com http://www.ehow.com/how_5925008_troubleshoot-indicator-flashing-sony-tv.html#ixzz2KBk1cWbu

hi ;
there's a problem in screen driver of your LCD, if you lost your receipt,that's bad luck.
if you know how to disassemble the back case of the TV , you can try some RESETTING of connectors from LCD screen driver to display driver board

its only 50% chance to remove the line.
thanks.....

Turn on the projector
press MENU (as show in picture step by step)
use down arrow key and select SETUP
press ENTER
use down arrow key to select LAMP SETTING
press ENTER
menu screen below will be appeared.
ON SCREEN display
setting for lamp replacement
Has the projection lamp been replaced?
YES NO
Select YES with left arrow key (yes is preselected)
press ENTER
ON SCREEN display
lamp replacement process is now complete
press ENTER
now exit the MENU with menu key and check the lamp timer

Go into the menu of the TV and toggle to "Banner" Highlight, and set to "off". If you don't have a copy of your manual, you can get it for free from www.sonystyle.com click on support, enter your model # in the box & download manual. Hope this helps

Hi,
Press Info/ Display button on TV remote, on-screen display will disappear.
Hope this info will help you.
Thanks.

Press Info/ Display button on TV remote, on-screen display will disappear.

If you press Display button on Bravia Remote, on-screen display or symbol will disappear.

Press Display button on Sony Bravia Remote and On-Screen Display will disappear.