D-Link DI-624M Router (DI624MRE) Logo
Posted on Nov 11, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a Dlink routerand am able to connenct tothe internet but cannot access the 192.168.1.1 to make sure it is set up correctly. It dropoff everytime that I shut down and then have to set up broadband again. When I go to cmd ipconfig /all it does not show the default gateway. I previously had it working correctly and had to recover my pc since then tried to set it up with the cd but would not copletely install and configure. How do I take it off completely to reinstall.

1 Answer

Computer hardware and networking support

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 4,281 Answers
  • Posted on Nov 11, 2010
Computer hardware and networking support
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 24, 2009
Answers
4281
Questions
0
Helped
972361
Points
12566

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still unable to access with above ip then press RESET button for 10 seconds then all settings defaults then you can access it. Let me know if you need further assistance. Thanks for using FixYa.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Direct access through LAN cable internet was working fine. whereas while connecting through DLink(Dir 600) pages were not loading correcly. I tried Netgear modem it was working fine. What is the probl

I would contact your ISP for help with this one. It should work but you would want to check the LAN and WAN settings to make sure they work on the network since there have been changes.
0helpful
1answer

Reset my dlink dir 615 router and now internet light stays flashing orange

Do you have the Internet connected to the Internet port in the back of the DLINK? You will have to configure the DLINK for internet access. Open a web browser to your DLINK and check on the configuration under internet-setup. Select the type of internet connection you have i.e. DHCP, PPPoE, Static, etc. Once that is set up, you should have access to the internet like before.
0helpful
1answer

Why does my phone keep sayin set network connenctions

You need to call your service provider so they can set it up and activate your network connection.
0helpful
1answer

After using wireless routerand having watch more than 3 netflix movies, i now can not reconnect to netflix or any internet channel on my wii.. I can still play games on wii but not go on line,,will not...

First thing to try is to set up the wireles connection again. Just like you did the first time, but use the "Connection 2" or 'connection 3' option. Let the wii search for access points and pick yours. If it can't find any access point then you know the wii is defective. If it finds access points hopefully yours is on the list. If not then maybe your router is at fault. (Wii Options->wii settings->internet->connection settings->)
0helpful
1answer

I have a d link d1 514 router. I'm unable to open 192.168.0.1. if i put the internet connection wire in LAN then I'm able to get internet access using cable but if i put the wire in wan, I'm not getting...

carry out the resetting of the dlink router
then use lan cable to gain access to dlink router,
set up the internet conenction (i.e. your internet provider modem plugged into the dlink router also)

if it has a built in wizard then just follow the on screen instructions

you will need to define SSID (wireless network name) and passkey (password for the wireless connection)

and the your done. disconnect the laptop from wired connection and connect via wireless
0helpful
1answer

I have problem setting up my wireless network and redirecting my wireless client to my local webpages before they can access to internet.   see this diagram below :...

you need to replace your modem with a router that is capable of running Network Address Translation. You are trying to route private IP's (192,168.x.x) over the public IP (internet) network.
1helpful
1answer

I have a DLink DIR-300 router and it perfectly functions and connects to internet. When I use my laptop, i have an uncommon problem. The laptop do connect to internet as normal and usual, but when i open...

log in and put in password.

set up router to automatically assign IP addresses and enable DHCP.

make sure your computer is set up to auto detect proxy settings when connecting to the internet.
1helpful
2answers

D Link model 2310

When you connected your PC directly to the modem, were you able to get the internet working automatically or did you have to run a dialup-like connection?

If it worked automatically, try this:
1. Connect a PC to a numbered port of the Dlink router (don't connect the modem to the router nor the PC)
2. Open Internet Explorer and enter http://192.168.0.1 on the address bar. This should then ask you to login. (restart the router and the PC if nothing happened then try again)
3. Enter admin for the username and blank for the password
4. Once you're on the Dlink Setup page, click on Network Settings on the left panel.
5. Change the Router IP address to 192.168.2.1 then hit Save Settings
6. Now, connect a cable from the Speedstream modem to the WAN port of the Dlink router then check if your internet is working from the wired PC.

If its still not working, turn off the modem and the router and then power the modem first (wait for the lights to be stable) then plug the router.

Hope this works for you. Goodluck!


0helpful
1answer

Dlink dir 300 internet problem

First you have to make sure that you connected it correctly. the cable coming out of the modem should be connected to the single port (Internet port) at the right when facing the back of the router.

All computers that are wired through it should be able to access the internet. if one of your computers cannot access the internet you may want to check the IP address that you are getting. (go to a command prompt and type ipconfig).

If you are connecting a wireless computer check the wireless security setting which you can find at the configuration (setup) page of the router. to access the configuration page check the owner's manual.
0helpful
1answer

My new d-linkdraft n

how far away is the laptop from the router? what is the laptop using to connect to the router? wifi? usb wireless device? etc
Not finding what you are looking for?

68 views

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...