Question about Computers & Internet
NETGEAR_EXT is the name or SSID of the extender. ie Netgear EXTender ;-]
What you need to do is first search for available wireless networks. It should show up there as NETGEAR_EXT if it is running and far enough away from your wifi.
Then open your web browser which should then open the connection wizard . If not you can try www.mywifiext.net. If you can't see it you may need to connect to it using a wire so you can set it up. sometimes if it is really messed up you may need to reset it to factory default.
Posted on Nov 11, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 18, 2015 | NetGear Universal WiFi Range Extender...
Jul 02, 2014 | NetGear Universal WiFi Range Extender...
WN2000RPT Setup Instructions
since I purchased a refurbished Netgear WN2000RPT it didn't come up with setup
instructions but once I emailed support they quickly responded with the info
below and it worked immediately.
Do this setup and your Netgear
WN2000RPT range extender will work:
1. With the help of a paper clip, press the reset button on the back of the extender for 20 seconds (please refer to the label on the bottom of the extender for reset button location). Release the reset button after 20 seconds and turn off the extender. Turn the extender on after few seconds.
2. Connect the extender to the computer with an Ethernet cable. Make sure that there is no connection between your router and the computer either wired or wireless. (I did this part by turning off the antenna to my laptop)**I went to the Network and Sharing Center and on the left click on "Change Adapter Settings" after that right click on your Wireless Network Connection and choose "Disable". Don't forget to re-enable when you're done.
3. Open a browser to start the Smart Wizard. **I had to use Internet Explorer and compatibility mode
4. Please select your Preferred Language and click on continue.
5. Let the Extender detect the list of networks available in the locality.
6. Select your network and note down the security assigned for your network and click on continue
7. Type in the security key for your network,please note that if you have WPA security assigned on your network type the network key in passphrase box and if you have WEP security setup on your network type in the network key in the Key1 box and click on continue. **I've read elsewhere NOT to use WEP security with this extender.
this one carefully)
8. Assign a name for the Extender as per your choice, also make sure that option "Use the Same security and passphrase as those for the existing network" is checked and then click on continue. **Under the step #3 Configure Extender I had to right click and refresh because there was no "continue" button!
9. Let the smart wizard establish the connection. On the next screen Click on the button "I have connected to the extender network" and click on continue.
10. Now click on the finish button to close the page.
11. It should ask you to save the page as bookmark, please save the page for future use.
12. Now open a new browser and check if you are online. (turn your antenna back on)**Re-enable your Wireless Network Connection.
13. You can now unplug the Ethernet cable from the extender and scan for the SSID of the extender and connect to it using the same network key as for you existing router.
most important part of the Netgear WN2000RPT setup is that you should NOT just
plug it in and use the setup wizard. The setup does not make it clear what you
should do when you get to the page with Key 1, Key 2, Key 3 & Key 4. If you
follow the directions above which I got by emailing to ask about Netgear
WN2000RPT setup then it will work the first time without any problem at all.
Just read the Netgear WN2000RPT setup instructions above carefully first and
then go through the step by step setup instructions slowly, one at a time and
be sure you do exactly what it says. If you follow the directions above you
will find that you can do your Netgear WN2000RPT setup without any problem at
more help? Don't call me! I only know that this worked for me and it was super
easy to follow the directions. I don't work for Netgear and I'm not really a
own a Florida ad agency.
Feb 11, 2012 | NetGear WN2000RPT Repeater
Mar 22, 2011 | NetGear WN2000RPT Repeater
Feb 28, 2011 | NetGear WN2000RPT Repeater
Jan 13, 2011 | NetGear WN2000RPT Repeater
Oct 29, 2010 | NetGear Computers & Internet
Nov 18, 2019 | HIS Computers & Internet
1,427 people viewed this question
Usually answered in minutes!