Cant log on to router - D-Link DI 514 Wireless Router (DI-514)

If you have forgotten your router's password, please follow the instructions below to resolve your issue.

The router can be set to factory default by pressing the Reset button of the router and resetting through the router's web-based setup page. Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. Any settings on the router will be erased and the router's IP address will become "192.168.1.1," the username is still blank, and the password will be "admin."

To perform a hardware reset on your Linksys router follow the steps below.
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the device before resetting.
Step 2:
Press the Reset button of the router for 30 seconds.

Figure 1: Location of the Reset button of a Linksys BEFW11S4 router.
NOTE: If your router does not look like this, refer to the other images below:
Figure 2: Location of the Reset button of a Linksys WRT54GX router.
Figure 3: Location of the Reset button of a Linksys WRT54GC router.
NOTE: If the image of your router is different from the ones shown above, please consult your router documentation.
Step 3:
If the normal reset does not work, unplug then plug back the router's power adapter while pressing the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: If you are using Mac to access the router's web-based setup page, click here.
Step 2:
When the router's web-based setup page appears, click Administration then Faccant log on to router - 4008-003.pngs.
NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Look for Restore cant log on to router - 4008-005.pngults and select Yes.
Step 4:
Click .