Have a XE A203 can not remove logo print "Thank

If your Sharp XE-A203 cash register is not stopping printing receipts or transaction records, you can try the following steps to troubleshoot the issue:

1. Clear any pending transactions: Press the "CA/AT/NS" key to cancel any ongoing transaction and clear the display. If there are any pending transactions in the register's memory, complete or void them to clear the system.
2. Check the paper roll: Make sure the paper roll is not jammed or empty. Replace the roll with a new one if necessary, and ensure that it is loaded correctly.
3. Reset the cash register: Press and hold the "RC/ON" key for five seconds to reset the register. This will clear any error codes and may resolve the issue.
4. Check the programming: Make sure the register is set up correctly and that there are no programming errors. Refer to the user manual for instructions on how to check and reprogram the register.
5. Seek technical assistance: If the issue persists, contact Sharp support or a qualified technician for further assistance. There may be a hardware issue that needs to be addressed.

It's essential to ensure that the problem is resolved promptly as continuous printing can lead to a waste of paper and ink, which can be costly in the long run.

Put the head down, i.e., make sure that the head is fully restored to its "losed" position.

That sounds like a cash register problem not the printer. It would be best to get a service tech.

Was this used or brand new? If new get it changed under warranty as the thermal print head is likely to be either faulty or borked

RTM?

tuuurn you key to the position between off and R and press rcpt buton once

Download it here... http://www.sharp.ca/downloads/dwnfile.asp?FileID=2402&FileName=XEA203_Cust_supp_tool%20.exe

MY NEW ELECTRONIC CASH REGISTER SHARP XE-A203 DSPLAYED IPL ON IT . WHAT DO I DO??

Here you go. The manual
http://www.ormsson.is/skjol//skrifstofutaeki/xe-a203,213,303_manual.pdf