I have been having problems getting sharp pictures. Especially indoors. I have the cool pix 6000 and reset all my settings to the factory settings. My pictures indoors seem almost "filtered"...not sharp at all. I took some pics outside and they are great. Shouldn't the auto setting adjust to take great pics inside and out?? Any help would be appreciated.

just let it reset Factory in mode picture

Sometimes the internal settings can affect this.
Go to the menus.
Then find a setting which is something like:
Return to factory settings or,
Reset all to Default or,
Many of these point and shoot Canons have settings:
func. set: Make sure it is not set to some setting for inside, florescent, etc.These will affect the bright settings.
Also, if there is no reset for default factory settings, then go through all the menus, including the ones in the Func. Set. -- Usually in the "joy-stick" center.

Hello,

Unfortunately, the answer is no. Samsung pn64d8000 TV does not have any advanced settings.

I hope this is clear. Please let me know if you have any more questions about this TV.

Regards.

Hello
There is no details about the factory reset of your tV in its user manual. But intvidual reset for picture, sound etc can be selected and can be reset to factory reset.

Summary of picture settings

The following picture settings can be confi gured. Depending on the

format of the picture source, some picture settings are not available.

• [Auto Picture]: Sets all picture settings to the factory default.

• [Brightness]: Adjusts the intensity and details of dark areas.

• [Contrast]: Adjusts the intensity of bright areas, keeping dark areas

unchanged.

• [Color]: Adjusts color saturation.

• [Tint]: Adjusts the color balance in an image.

• [Sharpness]: Adjusts the level of sharpness in image details.

• [Color Temperature]: To set the color temperature to [Normal],
[Warm] or [Cool].

Summary of sound settings

The following sound settings can be confi gured. Depending on the

sound source, some sound settings are not available.

• [Auto Sound]: Sets all sound settings to the factory default.

• [Equalizer]: Adjusts individual sound frequencies.

• [Virtual Surround Sound]: This selects the modes for more spatial

or surround sound reproduction.

• [Auto Volume Leveling]: Reduces sudden changes in volume, for

example, during commercials or when switching channels. Select

[On] or [Off].

• [TV Speakers]: Select [On] or [Off], or output sound to an

EasyLink compliant device. When [Speakers EasyLink] is selected,

the TV speakers are disabled and TV sound outputs to the speakers

of the compatible EasyLink compliant device. Adjust the volume
using the unit's remote control.
OK.

Try to reset camera to manufacturers settings. You can find this in
the setup options. It would say reset or initialize. If this doesn't solve your problem
then its probably a sensor problem and will need to be replaced.

If you have tried using the auto setting and it is still doing the blurry pictures it sounds like a problem with your camera not the settings themselves.
This blog http://www.teleplancamerarepair.com/camera-repair-blog/post/Got-Blurry-Pictures-Blurry-Image.aspx suggests a couple of the reasons might be:
"When your image appears distorted and with altered colors, in most of the cases there are two possible reasons:
- The internal shutter gets stuck , does not open completely or
- The image sensor is damaged.... "

i am using yashica ez digital 6032 camera but while using SD card of 4GB memory, it is not working. it is asking to format. Pl. help me regarding this problem. Shall i format the camera?

you pressed the color system format button/settings.on the remote press the P/N which means pal/secam and ntsc.press it several times or until you get a steady picture.when its black and white then you can press the set-up or menu button to correct your settings.

This sounds like a battery issue. Make sure the battery is fully charged and make sure that your charger is working.

using remote reset the factory settings