Instructions for setting time & date of armitron watch 44/1001?

To set the date and day on your Armitron 20/4591TT watch, follow these steps:

1. Press and hold the mode button until the display starts flashing.
2. Use the hour and minute buttons to set the current time.
3. Press and release the mode button to move to the date setting.
4. Use the hour and minute buttons to set the current date.
5. Press and release the mode button to move to the day setting.
6. Use the hour and minute buttons to set the current day of the week.
7. Press and release the mode button to exit the setting mode.

If you are having difficulty setting the date and day on your watch, you may want to consult the owner's manual for additional instructions.

Hi an_stocker0,
There is two pulls to set the time and date .First pull is for the day / date wind it in order to choose the right date number and second pull is for the time wind it until the desired time comes out. For better understanding follow this link for more information and instructions below. Feel free to ask whatever the results.
http://www.armitron.com/docs/Automatic%20Manual.pdf
Hope its may helps;
Regards, VOTIT

I don't know whether this is what you are looking for, as the watch comes with no packaged instructions OR general support, on their website, XD,

Nik.

http://home.earthlink.net/~eldonenew/armitron.htm

or

http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html



Armitron All-Sport Watch Instructions By Brian Walker eHow Contributor 9 Found This Helpful The Armitron All-Sport is a unisex style of watch made by Armitron that features a digital readout and four buttons around the outer dial for adjusting various aspects of the watch. It can set alarms, keeps the time as well as the date, and has a built-in backlight. Accessing and adjusting these various settings is a fairly simple process.

Other People Are Reading

• How to Set an Armitron WR330 Watch
• How Do I Change From Military Time on My Armitron Watch?

Setting Date, Time and Alarm

• To enter the date and time setting mode, press and hold the "mode" button, located on the top-left of the watch. Continue holding this button until the display begins to flash. This first display is the alarm setting, should you choose to set an alarm to go off. If you'd like to set the alarm, use the "alarm" button on the bottom-right of the watch to advance the hours to the desired one. Then press the mode button again; this will cycle through the minutes and seconds of the alarm to allow you to set those as well. Once you have set the alarm, you can press the "date" button at the top-right of the watch to proceed to the regular time setting. These numbers, which will now be flashing, also are adjusted by pressing the alarm button to change them. Pressing the date button again will now cycle through the hours, minutes, seconds and the date. As you continue to press the date button, the All-Sport will continuously cycle through these options; don't worry if you forget to set one, you can simply press the date button a few times until you get back to the setting you need to change. Once the alarm, time and date have all been set, you can press the mode button one more time to exit to the normal watch mode that will display the date and time.

Using Chime and Alarm

• The Armitron All-Sport features both an alarm and an hourly chime. The alarm function will cause the watch to continuously beep at the selected time until you turn it off by pressing a button. The chime will cause the watch to beep once every hour. You can turn both these features on and off by pressing and holding the alarm button and while holding it pressing the date button. The first time you do this, the chime will turn on and a small house symbol will be displayed on the watch face. Performing this button-pressing sequence again will turn on the alarm, which in turn displays a small clock icon on the watch face. Each successive pressing of this button sequence will alternate between the chime and the alarm, turning them either on or off.

Backlight

• The All-Sport also features a built-in backlight to help you view the watch in dark conditions. This light can be activated by pressing the "light" button on the bottom-left of the watch. Pressing this button is the only way to activate the light, and doing so will only cause the watch to illuminate for a few seconds at a time.

Read more : http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html

You can get instructions from the Amitron web site.
Copy "www.armitron.com/watch_instructions.asp" into your search engine
and you will see a list of illustrations of watches and associated
instructions.

Choose the one that looks like yours and download the PDF file.

Copy "www.armitron.com/watch_instructions.asp" into your search engine
and you will see a list of illustrations of watches and associated
instructions.

You can download the user manual for your watch from this link(http://www.watchesmanuals.com/Armitron/Armitron-Sport-40-8125BLK-Watch.htm)

I'm trying to fix the time on my watch which is the Armitron Pro Sport 44=1001 Womans.
I am looking forward to your solution.

Visit www.armitron.com
Click on SUPPORT and choose WATCH INSTRUCTIONS.
Download needed document and set your watch.

I found this document to help me. It is from Armitron. My watch didn't look exactly like the one shown, but the instructions still worked.

http://armitron.com/WatchPDFS/ArmitronLadiesDigital.pdf

Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Armitron says if the model is not listed on their site call them 718-784-0700. I did and they promptly e-mailed me PDF.file instructions for my M516 watch. - David