Hi!
I hope you have the guide to remove the doors of your model. And that you follow correctly these steps
1. Using a flat head screwdriver, gently pry off the door latch bezels.
A door latch bezel is illustrated on the left image. (Important not to break off
the lock tabs on the bezel on the right image)
can not remove the double doors of samsung - alpug_1.jpegploads/images/alpug_1.jpeg" alt="alpug_1.jpeg" class="h_mi" />
2. Removcan not remove the double doors of samsung - alpug_2.jpeg from the top cover.
3. Lift
the top cover up. Disconnect both door switch connectors, and then gently pry out the
ambient air temperature sensor. (See seconcan not remove the double doors of samsung - alpug_3.jpeglow
for second door swican not remove the double doors of samsung - alpug_4.jpegerature sensor location.)
4. Disconnect the two electrical connectors on the left hand side.
5.Disconnect
the water line by pushing in the release tab towards the connector housing,
and then pull the white water line out of the housing.
On both
hinges, remove the screw holding the green/yellow ground wire using a # 2 Phillips
screwdriver, and then disconnect the green/yellow ground wire from the hinge
assembly.
7. Remove
the three 10mm hex head bolts, and then remove the upper hinge.Repeat for the other hinge. (Warning: Have an assistant to support the door before removing the bolts. The
door is heavy and can fall.)
8. Lift the
door off the lower hinge and remove.
Hi!
For additional information this link will be of big help to remove and reattach the doors for the refrigerator and the freezer door of samsung rf265aabp
http://www.samsung.com/ca/support/howtog...
×
Broken wires at the ice maker temperature sensor can cause that problem. See my detailed posts under model RF265AABP for more diagnostic info and my solution to the problem.
647 views
Usually answered in minutes!
×