Error code F appears in middle of cycle. Will not spin
SOURCE: Kenmore HE2 front load washer. All cycle lights flashing plus spin and clothes clean lights on.
I'm sure this is probably too late, but hopefully it will help some else. I just had the same problem. First, unplug the power. Then take the lower front panel off and grabbed a bucket. Place the bucket under the large "plug" on your right. This is the drain. Slowly unscrew the drain plug, Hold your nose as it will probably smell. Allow the water and such to drain into the bucket. When you see the blob of wet lint drop into the bucket you will know why the machine refused to work. Make sure you clean the drain plug and screw it back in tightly. Put the lower panel back on and reconnect the power. I hope this resolves your issue.
895 views
Usually answered in minutes!
All the buttons light up right after the middle of the first cycle and the door stays locked.
ALL THE BUTTONS LIT UP AND THE HE2 PLUS SAID F SOMETHING THE DOOR STAYED LOCKED I BELEIVE IT WAS DUE TO OVERLOADING
Hi,
I'm getting F25 code on my Kenmore HE2 Plus washer. All buttons light up with F25 code. I can't find code in manual.
My Kenmore Front Loader HE 2 Plus in the middle of the cycle it says F on the front and all the lights light up...I am going on vaction and will deal with it later I just want to open it and get the clothes out,
What "F" Error code is it? The code will direct you to where you need to look for the problem. Does it drain?
×