At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I don't have many more details. We put in a new cartridge a few weeks ago, but my wife said it was working okay for a couple days, and then after that it began taking an extremely long time to print.
Not specifically, but it's a few years old, an HP PSC 1410 All in One. ThanksNot specifically, but it's a few years old, an HP PSC 1410 All in One. Thanks
You can't post conmments that contain an email address.
Re: I don't have many more details. We put in a new...
Uninstall the printer. Goto Control Pannel - Printers and Faxes and delete the printer. Re-install the printer. This would fix any issues with the drivers and setting.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have a cleaning cycle you can put this through I would run that a few times. Other option is to manually clean the ink jets and see if that fixes the problem. Somewhere along the line it is not registering that ink is coming out.
Well I recently bought a crosman like a month ago, I worked great, I also use CO2, then i started using it again, and all of a sudden all of the CO2 started seeping out of the barrel and CO2 area, cartridge after cartridge, so i said screw it and took it apart, and found the area that deals with the CO2 and tightened everything up. I couldn't put it back together, so i looked for the schematics and finally got it back together, then i tested it out and it works fine now. Good luck.
First Clean out your filter, Assuming the element is okay and cut-out are fine it should run okay, you could also try running it on low heat will take a bit longer but hey if it works great..Good luck
hope you put back both cartridges before trying again..try wiping the tip of the black cartridge before replacing it..then activate the head cleaning process..
I had the same light issue a few weeks ago. There is just a single light bulb with dual filaments for the high and low beams. All you need to do is replace the light bulb. The instructions are in the owners manual.
Hi springfield,
From what you describe I don?t think it has anything to do with your printer drivers. I would try the following:
-Run a couple of nozzle cleaning jobs.
-If no change I would suspect a defective cartridge and would try a brand new HP cartridge.
If these don?t work I?ll need some more details such as do you refill cartridges, buy remanufactured cartridges or use new HP. Also is this still under manufacturer?s warranty? I don?t want to suggest anything that would void it.
Let us know what happens and please don?t forget to rate the posting.
Can you specify how old is the printer?
Not specifically, but it's a few years old, an HP PSC 1410 All in One. Thanks
×