Please help me lexmark 7350

I suggest you unplug the printer from your computer. Then uninstall the software by clicking on Windows logo Start button > Programs > Lexmark 7300 Series folder > Tools > Uninstall. Then restart pc. Once pc's ready, check if your Vista is running on 32-bit or 64-bit by clicking on Windows logo Start button > right click on Computer > Properties. For the software, I suggest you use the updated driver from the Lexmark website. Click on this link: http://bit.ly/9G6ifO (for 32-bit) or this link: http://bit.ly/cUkJmB (for 64-bit). Download and install the software. Follow the instructions on the software. Hope this helps. If you need more assistance, leave it as a comment and I'll get back to it. Thanks.

http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:520:0:0

Tried looking for a driver couldnt find much for ya, but if you havent tried use Windows Update

This link will take you to Lexmark's page that contains an "Auto Detect" feature (provided that your printer is connected to your computer):

http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

It can most likely solve your issue.

www.hp.com partsurfer or eBay.

in some of the printers the power connector is given at the side of the printer.

for more information get on the link :-

http://www.lexmark.com/lexmark/product/home/719/0,6970,204816596_653293766_850430671_en,00.html?tabId=1#

Please do rate the solution

You can download the user manual from here:
http://www.lexmark.com/publications/pdfs/2007/7300/ug_en.pdf

Hope that helps! Should you have any further questions,please feel free to post them here.

P.S. – I would greatly appreciate a FixYa!rating if the solution I provided fixed or helped you resolve your problem.

Thank you for using FIXYA!

Cheers!
IrishDruid

SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray.Make sure that the product is turned off. 
Disconnect the USB cable from the back of the product.
Disconnect the power cord from the product.
Disconnect the power cord from the electrical outlet and wait 10 seconds.
Reconnect the power cord directly into the electrical outlet and check for the following.
Make sure that the power cord used is the one provided with the product.
If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet.
Make sure that the power cord is firmly connected to both the product and the power supply.
Reconnect the power cord to the back of the product.
Press the power button ( ) to turn on the product.
Reconnect the USB cable to the back of the product.
If the issue is resolved, proceed to Step six: Print a self-test page.
If the issue continues, proceed to the next step.

for more information please go to below link>>

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458822&cc=us&lc=en&dlc=en

Thanks for using FixYa.

Hi,

You can download here from Lexmark.

http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+X7350

Just pick your operating system.

Step by Step info is on this link: http://www.lexmark.com/publications/pdfs/7300/eng/setupsh.pdf You can download the manual from the link below: http://www.lexmark.com/lexmark/channel/frameset/home_no_nav/0,6919,204816596_659668502_0_en,00.html Please update the question & let us know if the information given was useful to you - Good Luck!