I self cleaned my oven and after the timer went out the door wont unlock and it says error 1... im not sure of the model number but it is a whirlpool gold accubake
I have a Whirlpool MOD. RBS275PDB17 single electric self-cleaning oven; although the manual is generic, it specifies, "When the cycle is completed and the oven cools, "End" will appear on the lower oven display and "LOCKED' will disappear" and "To Stop Self-Clean any time: Press UPPER/OFF, LOWER/OFF or OFF/CANCEL. If the oven temperature is too high, the door will remain locked. It will not unlock until the oven cools." Has your oven had time to cool?
Troubleshooting guide>>Control Lock, p. 7: "The Control Lock shuts down the control panel pads to prevent unintended use of the ovens. When the control locked, only the CLOCK, TIMER SET and TIMER OFF pads will function. The Control Lock is preset unlocked, but can be locked. TO LOCK/UNLOCK CONTROL; Before locking, make sure the ovens, Timer and Timed Cooking are off. Press and hold START/ENTER until a single tone sounds and "Loc," a picture of a lock and "START?" will appear on the oven display, about 5 seconds. Repeat to unlock and remove "Loc" from display. Could this help?
×
2,452 views
Usually answered in minutes!
After the time went off from being cleaned, the oven door did open. When I went back to open it and get the debris out and it was cooled it won't open. It doesn't have the lock code on either. How can I open it??? Why would it lock after I had already opened it? I have 40 people coming for dinner in 3 days!
Like you, my problems happened after using the self cleaning. I followed the instructions you gave. It did not clear the problem. The display show shows everything is working...preheating..then timed cooking. But, no heat. What do I do? I have locked and unlocked the door.
same problem
×