Weathermaker SX Carrier 58SX060-cc-1

possibly a plugged drain pan or the condensate line

Are the tips of the flame blue? You might need to adjust the air mixture sleeve on the burner.

Hello, usually this is a sign of a bad blower relay on the intergrated control board. The only option is to replace the control board.

I believe this is the furnace with a spark to light the pilot light. If so the best advice I can give is to replace the whole pilot assembly. There is a very old style flame sensor in there that is not serviceable. This has driven many a technician around the bend.

**NOTE: It is a real pain to get out, and back in. You need to take off the fire box cover and the panel underneath it to get it out. You also need to take the pilot tube off the gas valve. This may be something that you want to call a service tech for. It could be a little tricky and because you are dealing with gas, you want to make sure that it is put together correctly and safely.

This can be from a bad connection on a contactor relay. Or can also sometimes indicate a bad capacitor.

either fan capacitor or fan itself is defective

The carrier sx series went through a number of control systems over the years. can you find the full model, and series numbers? They are located behind the door on the left side. (i.e. 58 sxc080-100 series100)

Remove all power from the furnace, it is likely the brain in the furnace is need of being reset, from the battery replacement, why did you change the battery, was there an indicator telling you to change it?

Many times just removing all the power to the furnace will do the trick with a reset, if not let me know and we will go from there, but it sounds like the main brain is confused or bad, more likely confused, so try the power removed first.

Than let me know [email protected]

sounds like the sensing bar on the spark ignition is dirty.....a wire brush works nicely.