GE Profile JTP56 Electric Double Oven Logo

Related Topics:

Posted on Jun 11, 2008
Answered

GE Profile Performance Double Oven

I am constantly getting an error code F0 and F1. Somtimes on just 1 oven and sometimes on both. At times the oven will not even work.
What should I do?

Answer This Question
  • 2 more comments 
  • mnleckie Jun 21, 2008

    for the first time since we got our oven five years ago, we are getting the F0 error code, along with the beepint and nothing else works. What do we do?

  • Anonymous Aug 10, 2008

    We have a GE Profile Oven and just started flashing the F1 error and beeping continuously. It will not stop unless the oven is turned on. Is there any solution to this?

  • karenoc Dec 17, 2008

    I have the F1 problem on my GE profile double oven and part from GE is obsolete. Tried suggested solution link on the Fixya board but it is broken. Can suggested solution be re-posted?

  • mill18 Dec 20, 2008

    ge profile slide in range gicing fo mesage and nonthing on the panel works

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jun 27, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jun 27, 2008
Answers
1
Questions
0
Helped
1922
Points
1

I was getting only the F0 error code. The wiring diagram inside the stove said F0 indicated a bad off button on the keypanel. There were instructions to check the ribbon cable on certain lines, with values for the resistance. It seemed to check out, so I ordered a replacement and voila, it worked.

Anonymous

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 10 Answers
  • Posted on Aug 20, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: Aug 18, 2008
Answers
10
Questions
0
Helped
6588
Points
16

I had a similar problem,  try the fix belowhttp://www.fixya.com/howto/h155060-dreaded_f7_error it may work.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ge double oven f1 error model jkp55wot1
F-1 error code.
Sometimes one or more buttons on the touch panel "get Stuck"
Nothing you can do to reset them, Good Luck.
Many times it means the touch panel needs to be replaced.
Read full answer
Jul 09, 2014 • GE Profile JTP56 Electric Double Oven
0helpful
1answer

I keep getting FO code and beeping won't clear
Hello George,

The F0 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F0 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced .

GENE
Read full answer
Oct 05, 2011 • GE Profile JKP56 Electric Double Oven
2helpful
1answer

Double wall oven F0 error code
Hello,

The F0 error code means that the control board has detected a defect within the control board itself, the F0 code can be cleared by pushing the CANCEL/OFF button and if it goes away and returns all is well,however if a short time later the F0 returns the control board would need to be replaced.


GENE
Read full answer
Oct 04, 2011 • GE Profile 30" Built-In Double Electric...
2helpful
1answer

Error code - F0
F0 Stuck touch pad Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be cancelled, replace the oven control (also called clock or ERC), touch pad, or both.
Read full answer
Sep 14, 2010 • GE Profile JTP56 Electric Double Oven
0helpful
1answer

Ge profile performance double oven. getting an F7
F7 is a stuck keypad/button.
Push all buttons at random several times each. This will sometimes un-stick a stuck button.
If that does not work the keypad control will have to be replaced.
Read full answer
Jan 16, 2010 • GE Ovens
2helpful
1answer

The upper and lower oven will not turn on there is power to it and clock and oven lights work there is an FO red light that comes on and beeps and flashes
Built In Oven Fault Codes
F0 or F1 - Failed transistor in control - If code cannot be cancelled, replace the Electronic Range Control (ERC) or touch pad
Read full answer
Sep 21, 2009 • GE Profile JTP56 Electric Double Oven
5helpful
1answer

GE Profile Performance Spectra Range error code F0
F0 - F1 - F7 Stuck keypad may mean relay is turned on. Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.
Read full answer
Jun 20, 2009 • GE JKS05 Electric Single Oven
0helpful
1answer

F0 error code on GE Profile PT956 double electric oven
you can also put a piece of paper between the ribbon cable where it joins up before the connector. It has been reported that the cable will short in this area. Try that before spending more money since most of the F-codes appear to be cable related.
Read full answer
Dec 01, 2008 • GE Profile PT956 Electric Double Oven
3helpful
1answer

GE Profile double Built-In Oven error Code
According to the GE User manual... any F# error code means you have a function error and they suggest you press the CLEAR/OFF pad and allow the oven to cool for one hour. Then put the oven back into operation. If the function code repeats, disconnect all power from th eoven for at least 30 seconds and then reconnect it.. If it still comes back.. call for service.. however it has been my observation that F0 is usually a shorted off key on the keypad. Hope this helps..
Read full answer
Sep 21, 2008 • GE Profile JTP56 Electric Double Oven
0helpful
2answers

F0 error - My GE Over displays an F0 error & constantly beeps
Appu, the F0 error for this built in means there is a shorted or stuck off key. Sometimes this can be resolved by removing the keypad ribbon cable from the board and cleaning the ends with an eraser. If that doesn't work, you want to find out whether its the board or keypad by ohming the ribbon cable, 3 to 4, probes on the conductor side...should read 125 to 1750 ohms while pressing the off key. Catriver..post back.
Read full answer
Apr 29, 2007 • GE Profile JK915 Electric Single Oven
Not finding what you are looking for?

View Most Popular

Profile JTP56 Electric Double Oven

  • Ovens

Related Question

Ge double oven f1 error model jkp55wot1

  • GE Profile JTP56 Electric Double Oven

Related Topics

1,932 views

Ask a Question

Usually answered in minutes!

Popular Questions

Our GE Profile JTP18 keeps flashing "door lock" since we ran a self clean

GE Profile JTP18 Electric Single...

GE Profile Oven FTP18 - F7 Code

GE Profile JTP18 Electric Single...

Got error code F9 while oven cleaning in process.

GE Profile JTP56 Electric Double...

Oven fan keeps running even after off and door open

GE Profile JTP18 Electric Single...

F7 error message on GE oven

GE Profile JT952 Electric Double...

Top GE Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. Profile JTP56 Electric Double Oven...

Profile JTP56...

PDF Manual
. Profile JTP56 Electric Double Oven...

Profile JTP56...

Loading...