Full memory Please can you advise how to empty the memory so as to speed up things. Also how do we get the machine to take multiple pages through quickly and store them in memory rather than slowly taking one at a time? Thank you

I have this manual. [email protected]. Please put SAMSUNG SF3100 as the subject. List of Features
This machine was designed using the latest technology. It is a full-featured, high-performance machine that not only meets, but exceeds industry standards. The following is a list of its many exciting features:
Features for both SF-3100 and SF-3100T
• Inkjet printing on plain paper
• 14.4Kbps high speed faxing
• 80 page holding memory
• Seven language display and report; English, German, French, Italian, Spanish, Portuguese and Dutch .
• Stand-alone, full-function fax machine
• Convenient 99 pages desk-top copier
• 15 page Anti-Skew Document Feeder
• Five One-Touch and 50 Speed-Dialing locations
• Group Dialing to eliminate repetitive dialing to the same multiple destinations
• Four reception modes; TEL, FAX, AUTO and TAM1
• Broadcasting to send the same document to multiple destinations

MEMORY IS FULL / SEE MANUAL (alternating messages)
The memory is full. You may have too many messages recorded in the answering machine. To erase messages, see below. This may occur during fax reception if too much data is received before the pages can be printed out. If faxes have been received to memory because printing is not possible (an additional message will indicate the problem), resolve the problem so that printing can continue (see Substitute Reception to Memory on page 66). If you are attempting to transmit from memory, see If the memory becomes full on page 57. If you are copying, see If MEMORY IS FULL appears on page 67.

Erasing received messages:
It is important to erase received messages after you listen to them to ensure
that the memory does not become full.
? Erasing all messages: To erase all messages, press FUNCTION, DELETE, and then START/MEMORY.
? Erasing a single message: To erase a single message, press DELETE while the message is being played.


If the memory becomes full while the document is being scanned, MEMORY
IS FULL and SEE MANUAL will alternately appear in the display.
? Press START / MEMORY if you want to transmit the pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the memory filled up.
? Press STOP if you want to cancel the entire transmission.

If the memory becomes full while the document is being scanned, MEMORY IS FULL will appear in the display. This may occur during fax reception if too much data is received before the pages can be printed out.

1. Press these keys: (function) 6 # #
2. The display will show: RECEPTION RATIO
3. Press 1 to turn automatic reduction on.
4. Select the reception ratio to be used in the event that the memory becomes full (automatic reduction is not possible when the memory is full). Press 1 for 93% or 2 for 100%.
5. Press the STOP key.
   

If you are attempting to transmit from memory:

1. Press the START/MEMORY key if you want to transmit the pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder.
2. After transmission, the memory will be cleared and you can transmit the remaining pages.
3. You will also need to transmit the page which was being scanned when the memory filled up.
4. Press the STOP key if you want to cancel the entire transmission.
   

Here is a copy of the User Manual for the Sharp UX30:
http://www.docshare.com/doc/227849/Sharp-UX30-User-Manual


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Its a fluke. Messing with your fax parameters can really screw things up. I don't advise it.

try this
press "menu" and then "#" button, go to service mode. Select the "clear data function". and select "memory clear"

it may be a memory size issue check or buffer size...
good lock

Exactly the same thing happend to me with my brand-new Aiptek. Turns out it was the no-name brand SD card that I got from China which destroyed it. Aiptek was kind enough to replace it for free since it was under warranty. Aiptek's caution: Stick to brands like SanDisk, Dane-Elec, Kingston, Transcend or PNY. Purchase from resellers like Target, Best Buy, Newegg.com or Amazon.com. Avoid MINI & MACRO style cards. NO Sandisk Ultra II or Extreme III, class 6. AVOID Hi-SPEED!

Hi,
I can advise you on the 'memory full' problem, mate.

If you get a MEMORY FULL message while scanning the first page of a fax, press Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned
so far, or to press Stop to cancel the operation. In this case, send the fax by the Manual Transmission.
Depending on your typical faxes, MEMORY FULL errors can occur frequently. If this happens, change the Memory Transmission setting back to OFF.
To do this:

Press Function/Set, 3, 9.
This should take you to MEMORY TX
and MEMORY TX: ON?
Then press either the left or the right arrow (< or >) to switch on or off, and press Function/Set.
For the next fax transmission only, press < or > to select
NEXT FAX ONLY and press Function/Set.

This will mean you don't add any more to the memory and may be able to send faxes. There is a possibility that you will only be able to fax using manual transmission, but at least you should be able to use the machine to fax at all!

I apologise if the jargon is confusing, just try to go through the process one step at a time and you should be fine.

Hope this helps :)

Chris (ziraffa)

This is right from the manual:
You can use the Multiple Send feature, which allows you to send a fax to
multiple locations. Originals are automatically stored in memory and sent
to a remote station. After transmission, the originals are automatically
erased from memory.
1 Press Fax.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Adjust the document resolution and darkness to suit your fax needs.
See page 9.1.
4 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
5 Press the Scroll buttons until Multi Send appears and press OK.
6 Enter the number of the first receiving fax machine and press OK.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details, see page 10.2.
7 Enter the second fax number and press OK.
The display asks you to enter another fax number to send the
document.
8 To enter more fax numbers, press OK when Yes appears and
repeat steps 6 and 7. You can add up to 209 destinations.
Note
You cannot use group dial numbers for another fax number.
9 When you have finished entering fax numbers, select No at the
Another No.? prompt and press OK or Start.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
10 If an original is placed on the scanner glass, select Yes to add
another pages. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine begins sending the fax to the numbers you entered in
the order in which you entered them.

Manual - see page 54

If your brother Intelli Fax 775 says..Memory full, erase message...this is what you do. Press "menu 84" then press the fax start button. Your fax will print every fax in memory and it will clear itself. To turn off the memory so this does not happen again..Press Menu then 82, then a up or down button, so it reads "off". Then the stop/exit button, and your done.