I have a Sanyo VPC-S120 that my daughter has had since sept. 15th and she went to take a picture and the lens hung out and will not go back in and is saying system error and we purchased a 1 year warrenty what do we do to get her another camera ???

Try these procedures.

Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Check to make sure the batteries are okay,and what mode your in because some modes will not allow the camera lens to come out

It uses SD and SDHC cards, ranging up to 32GB in size. You don't need to worry about the brand or the speed.

Hi.

This is a common problem.

You can send camera for repair here: Repair.

See here an article: Sanyo digital camera is not starting and you get lens error

Use an SD card reader. It's that simple.

Hello

Unfortunately a "system error" message is not something that you will be able to fix. This error indicates a system failure and requires the camera to be sent in for servicing and repair.

You may find it more cost effective to purchase a new camera as opposed to the repair price on your current camera.

Seems to be a common problem... walmart.com reviews show a few people having the same problem and after only owning this camera for 3 weeks, it is doing the same thing to me. I'm taking mine back for a refund tomorrow.

My camera was showing lens error 12&25 and then shutting off. I tried gently trying to twist and pull the furthest out part of the lens and it popped back into place easily. It made a noise when it did this, and then i turned the camera off, and the lens went back in!! Completely fixed now!!