Posted on Jun 08, 2008

Weak or no signal message

My samsung lcd tv is giving me a weak or no signal message. it worked fine earlier no signal been trying for 10 hours to play with remote control and program under CHANNEL all versions without luck.
what shall i do?

1 more comment
Anonymous Jun 30, 2008

I don't have cable nor satellite. I did however purchase a new antenna (RCA) for my new HDTV LCD Samsung...32 inch home theater
I continue to get weak or no signal intermittenly.
Anonymous Jul 01, 2008

we are getting "weak or no signal" on our Samsung TV screen also??? no picture and no sound??
Anonymous Mar 21, 2014

no signal no signal

×

3 Answers

Anonymous

Contributor 2 Answers
Posted on Nov 18, 2008

Contributor

Joined: Nov 18, 2008

Answers

2

Questions

0

Helped

16272

Points

26

Since my problem (Samsung/Comcast) began with a channel selection button pushed on the TV remote when it should have been pushed on the cable remote, I figured the problem lay with the TV. Although I was getting the "weak or no signal" msg., the actual signal strength bar graphic showed it to be strong. Disconnecting did no good. I surmised that the TV was simply not recognizing the box.
I looked at the manual for my Samsung 750 model.
Page 20 discussed "Selecting the source". I accessed the TV menu and selected "Input", then chose the "HD..." item from the highlighted list. Voila! My tv works again.

A

Anonymous

I'm having the same problem. My tv has been working completely fine and now it just popped up a gray fuzzy screen and says Weak or No Signal. What do I do to get it to work?

Anonymous Dec 22, 2012

get a new signal board cause its goin and its the common problem with them

×

A

Anonymous

Try retuning it then reboot the tv and then enjoy worked for me

Add Your Answer

Upload an image from your computer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...

Include an image. It's worth a thousand words.

Related Questions:

0helpful

1answer

Samsung, cablevision and tivo - weak or no signal message

With the TV remote you must select which signal input that you want to watch. You can have a TV cable, an HDMI plug, AV, and component, all connected at once and watch the one that you want to. After you select which ONE that you wish to see displayed on the screen, you will have to use the remote for that device

Read full answer

Feb 03, 2018 • Televison & Video

0helpful

1answer

Suddenly dropped hdmi signal on all ports - sees device but gets

Switch off the TV, switch off power and remove plug and wait for 48 hours and retry.

Read full answer

Jul 28, 2012 • Samsung UN55C9000 55 in. 3D LCD TV

0helpful

1answer

I have two Samsung HD ready series LCD TVS in two different rooms. Both have their own Samsung remote. TV1 works fine. TV2 works fine BUT when TV@ remote switches TV2 on it also switches TV! off! How can...

Hi, To change one of your TV with another brand is not a wise decision indeed. Well, Your TV has a remote sensor in the front side. Try to places both TV on opposite position. Otherwise use the used batteries on both of your TV remote commander. This will reduce its signal.
Regards

Read full answer

Jan 17, 2011 • Samsung TV Remote Control

0helpful

1answer

Vizio vw32l will not show picture or play sound on any input. The tv powers on fine and the OSD works using the side buttons and remote but it gives me the "No Signal" message on any input I try. I'm...

Hi ,

Get a technician check the ports on the video card if there are dry joints if ok change the video/audio card .

peace .

Read full answer

Jan 10, 2018 • Vizio L32 32 in. LCD HDTV

1helpful

3answers

Samsung LCD TV ''Weak or No Signal''

try swicth cable box for testing....if sam problem..need replaced tv main board

Read full answer

Jan 01, 2010 • Samsung LN32A330 32 in. LCD TV

0helpful

1answer

Digital - Weak or no signal digital coax when hdmi dvd player on

if u have placed your DVD next to your tv ... just maintain distance between then and check out

Read full answer

Apr 01, 2009 • Samsung LE40R74BDX 40 in. LCD Television

0helpful

1answer

''no signal'' message on blue screen after watching for 10-30 min

First try another signal input like a DVD player or other source, is the signal displayed ok? Then you have lost the signal on one input from whatever the device is.

Read full answer

Mar 16, 2017 • Spectroniq PLTV3250 32 in. LCD TV

3helpful

1answer

"Weak or No Signal" message on Samsung 26" LCD TV

I pressed mute on my television and about 5 minutes later it said weak or no signal.What do I do?

Read full answer

Feb 24, 2009 • Samsung LA26R71BD 26 in. HD-Ready LCD TV

0helpful

1answer

Weak or no Signal issue when connected to my TV.

Yes weak signal. Also closing the laptop lid puts the computer in sleep mode.

Read full answer

Jul 07, 2017 • Digital Lifestyle FA1B32Z 32 in. LCD...

0helpful

1answer

Weak or no signal message

Is this a joke? How am i suppose to get help?

Read full answer

Dec 17, 2007 • Samsung LN-S4092D 40 in. LCD HDTV

Not finding what you are looking for?

View Most Popular

LN-S4092D 40 in. LCD HDTV

Televison & Video

Related Question

Samsung, cablevision and tivo - weak or no signal message

Televison & Video

15,267 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Samsung Televison & Video Experts

Grand Canyon Tech

Level 3 Expert

3867 Answers

Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Samsung LN-S4092D 40 in. LCD HDTV? Or just drag it here!

Loading...