Bosch washing machine WAS32460gb having error code nr0 unable to change settings. last time used washing machine was to was whites 90 on 800 spin then extra spin at 1600

If your Bosch Avantixx6 VarioPerfect washing machine is beeping and the light is cycling through the spin cycles without any other noise or action, it could indicate a potential issue with the machine. Here are a few troubleshooting steps you can try:

1. Check for error codes: Some Bosch washing machines display error codes on the control panel when a problem occurs. Look for any error codes or error messages that may be displayed. Refer to your washing machine's manual or the manufacturer's website to understand what the specific error code means and how to address it.
2. Check the door/lid: Ensure that the door or lid of the washing machine is securely closed. If the door is not closed properly, the machine may not start or may display an error. Open the door and close it firmly, making sure it latches properly.
3. Check water supply: Ensure that the water supply to the washing machine is turned on and there is an adequate water supply. If the machine doesn't detect sufficient water, it may not start or may display an error. Check the water inlet hoses and the water supply valves to ensure they are properly connected and not blocked or kinked.
4. Power cycle the machine: Turn off the washing machine and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This power cycle may help reset any temporary glitches or errors in the machine.
5. Contact customer support: If the issue persists and you are unable to identify the cause or resolve it on your own, it's recommended to contact Bosch customer support or a qualified appliance repair technician.

error E:00 in Bosch Caroline, Could not find anything pertaining to this Bosch code. You may be can contact Bosch at last link posted or download manual.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How to Identify Bosch Washing Machine Error Codes

How to Identify an Error Code on Bosch Washing Machine

Washing Machine Error Codes Front Load and Top Load Washers

Download instruction manuals

Try this: Quite a few bosch units.
http://www.ukwhitegoods.co.uk/forumsphpbb3/washing-machine-forum/

motor brushes on bosch machines typically last 6-7 years its the first thing to check

Sump hose has fallen off Unplug tilt machine back have a look underside to check also could be the soap dispenser hose Hole in it.This rubs away on side of machine 5yrs old.

This might help you with the pump its on a bosch Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Bosch Logixx 8 error code nr0 means - The childproof lock has been activated.

Just deactivate the childproof lock.

Hi there:
You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time.

Hopefully one of other experts will be able to provide you with a real solution.

Thank you for using FixYa.

Hi there:
You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time.

Hopefully one of other experts will be able to provide you with a real solution.

Thank you for using FixYa.

It is the child lock. Turn machine on & then press & hold the start button for 5 second. Code will flash then disappear & machine will be back to normal.

Page 5 of instruction manual for more details