Do I need a dtv digital converter box for my Symphonic SC313D 13 inch tv?

no it is not digital but if you buy a freeview box it will go

very few if any universal remotes will work on Symphonic which is also Funai and some other brands.

Look on Ebay or Google the model number of the set with the word remote, remember not a universal.

I hope that after all this time, you were able to find that code. But if you weren't, or you still have some questions, here are some steps and codes.

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

733
632
694


Becki Barned
DISH Network Customer Service

I hope that you have found the code already, but if not, I am here to help!!! Follow the link below, which will walk you through programing the DISH remote to that tv. Very simple process!!!!

http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf



Becki Barned
DISH Network Customer Service

what are the codes for 19" symphonic st 4919?

Here is the manual: http://www.symphonic.us/pdf/om/SC313D.pdf Follow the instructions for connecting a cable box to connect your converter box. Front panel buttons can be used to make menu selections if you do not have a remote.

Yes I have solved my problem. Thank you very much for the help. I came across a web site that gives you the TV codes so I can program my Direct remote.Thank you again.

d tv

It is not HD , if this is wat you are asking.
if you have cable or are yousing sat you will have no problems reciving signals.

Is it possible to record TV programming on a VCR when using a DTV converter? h1 = document.getElementById("title").getElementsByTagName("h1")[0];h1.innerHTML = widont(h1.innerHTML); Hi,

I had the same problem and found this answer that worked for me. Hope this does the trick for you.

Simple stated, your VCR must be set to channel 3 also. Check it out.

woody

1. You must have the VCR tuned to record on channel 3.
2. You must have the VCR connected to output signal of the DTV converter box. In other words, the converter box must be connected between the antenna and the VCR. So, the likely configuration you would use with a coaxial cable is antenna to DTV converter to VCR to TV.
3. You must tune the DTV converter to the channel you want to record prior to recording. The VCR won't be able to change channels on the DTV converter.
4. You will be able to use the timed record function on the VCR but you must adhere to steps 1-3.

If this sounds freakishly familiar to recording on a digital cable or satellite set-top box, you are right. It is exactly like recording a signal from a digital cable box or satellite receiver. While it may be inconvenient to perform the steps above, at least the option still exists to record on a VCR while using a DTV converter box.
Disadvantage of DTV Converter: You will lose the ability to watch one program and record another with the DTV converter. Sorry for the bad news.
The reason is the tuner. The VCR tuner is useless with digital except for recognizing channel 3. The digital converter is a single tuner item so it only receives one station at a time.