No sound on video, even when played back through pc although audio detecting programmes pick it up??

I have this amp and mine does not have the latest firmware (indicated by a green or blue dot near the serial number) and it does not pass through Audio or Video when a 3D Blu-Ray is played in my PS3 although my TV (Sony Bravia XBR-52HX909) does say "3D Video Signal Detected." No audio or video ever plays but the PS3 looks like it's playing.

I’m happy to help further over the phone at https://www.6ya.com/expert/matt_7e951e081251ffbc

with the easy cap while in capture you can only have sound or video. the solution will be in the source options. Make sure when in capture u can see vid & NO sound once recorded and played back sound will be there.

go to control panel and here open sound and supoort icon.... chk it is performing well.....if it is not wrking then may be reinstall the driver of sound driver and then play the audio

control panel add new hardware follow instructions if it does'nt automatically pick up sound and monitor then click next and choose from list

Did you set up the camera to capture sound? This Camera has a Functions menu which is deep as the ocean, and standard movie capture does not also pick up sound. Additionally, if playing the movie back over an external device, use the A/V cable not USB, and get a High Capacity SD/MMC memory card if you want more than a few moments of video with sound. I would finally recommend an audio input device, as even when in Movie sound capture mode, the volume is never very loud.
Read the advanced manual completely.

Have you tried lowering your pick ups? If they are too close to your stings they could be picking too much. also try playing with the settings on your amp.

change the sound output to HDMI? does the sound work on just like a normal tv channel?

There is no sound carrier on an S video connection. It's Video only. use the AV left and right cables for the sound. It is normal not to monitor audio when capturing.

Check in contraol Panel under sounds and audio devices that you are using the Edirol and not an on board sound. It sounds like although the cards installed its not selected as the audio device to record from. You will also have to tel Adobce audition to select the Edirol as you audio card of choice as it to can be changed to select input from other sound devices.

try install video editing software to translate both video and audeo.to you computer.