Mitsubishi WT-46807 46" Rear Projection Television Logo
Anonymous
Anonymous Posted on Oct 16, 2010
Answered

Mitsubishi model Wt-46807 Power shuts down after turning on. Tried the solution of pressing the menu & input buttons at same time for at least 5 seconds. Power light error code was 2 blinks/pause 2 blinks/ pause continously. How can I fix? Please help can't afford new tv now. Thanks, Diane

Answer This Question
  • 2 more comments 
  • Anonymous Oct 16, 2010

    Please help with locating the "PICO" fuses. The left side of the diagram inset is cut off.

    Thanks,

    diane

  • Anonymous Oct 16, 2010

    Also are pico fuses removeable or soldered in fuses

  • Anonymous Oct 16, 2010

    I was able to locate Green in color pico fuses marked F9a02, f9a04

  • Anonymous Oct 16, 2010

    I don't have a multimeter. How do I check if fuses are bad? Please email detailed instructions to [email protected] on how to solder or replace fuses. How can I get to the circuit board easily/ It won't slide out/
    thks

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Master 10,594 Answers
  • Posted on Oct 16, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: May 26, 2008
Answers
10594
Questions
9
Helped
2956029
Points
33084

Hi,
Error code 2-2 indicates "Short Protect Circuit" problem in tv.
Need to check pico fuses in power supply as one or two got blown due to bad convergence chips.
Below is an exploded view of tv chassis, power supply and convergence area has been marked to give you better idea to look for pico fuses.
Unplug tv from wall socket before to repair/check any thing inside tv.
Hope these info will help you.
Let me know if you have additional question.
Thanks.

Mitsubishi model Wt-46807 Power shuts - 763826c.jpg

  • 1 more comment 
  • Anonymous Oct 16, 2010

    Pico fuses has circuit location number so find F9A04 and F9A05, these are +24V and -24V fuses.
    Above picture is complete as I tried to show tv chassis. Below is bit detailed exploded view and area marked to locate above fuses, in fact you will see few more fuese like F9A02, F9A03 etc there so check them all with multimeter.
    Thanks.

  • Anonymous Oct 16, 2010

    Pico fuse is soldered in circuit board and soldering work is required to replace them.

  • Anonymous Oct 16, 2010

    It is not safe for you to involve yourself in tv repair if you have no knowledge, experience or necessary tools like multimeter, soldering iron etc
    I would recommend to have friend's help who has done that sort of work before. I gave you info about problem and its solution and it is not possible for me to send you minor details.
    Thanks.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Audio but no picture mitsubishi wt-46807
Did you try the OPTION menu---think I offered that to you a few days ago......
Read full answer
Mar 27, 2012 • Mitsubishi WT-46807 46" Rear Projection...
1helpful
1answer

Screen shuts off shortly after turning on
Do the self check this model has, when green power light comes on and then goes out on the front of the set press and hold both the Menu and Input (device) buttons at the same time for at least 5 seconds, then release both buttons and watch the power light, It will blink a two digit code, a error code.

Most common is 2 blinks, 2 blinks, a pause and then it will repeat the code several times.

Let me know what code you find and I will tell you what it means.

This is a self check meant to narrow down what kind of problem the set has.

Make a comment here so I can help.

SD TECH
Read full answer
Jan 15, 2011 • Mitsubishi WT-46807 46" Rear Projection...
1helpful
1answer

My Mitsubishi WT 46807 will not power up. The green light on the front stays on for approximately 2 seconds and then goes out with no audio or visual. I tried unplugging the set for about 15 minutes but...
yes!

When you turn set on and power light goes out do the self check this set has.

On front of set when light goes out press and hold both the Menu and Input (device) buttons at the same time and hold both for at least five seconds and then release both.

Power light will blink a two digit error code like 2 blinks,2 blinks, a pause and repeat it several times.


Let me know what error code you find and I will tell you what it means. Make a comment here and I will assist you.

SD TECH
Read full answer
Nov 27, 2010 • Mitsubishi WT-46807 46" Rear Projection...
5helpful
1answer

I have a mitsubishi wt-42315. when i turn it on it shuts down right away. any thoughts?
Do the self check this model has.

When you turn it on and green power light goes out:

on front of set press and hold both the menu and input (or device) buttons at the same time for at least 5 seconds and release both buttons.

The power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know what error code you find and I will tell you what problem is.

If this helped rate this solution as very helpful as I do this here for free.

SD TECH
Read full answer
Sep 20, 2010 • Mitsubishi WT-42315 42" TV
10helpful
1answer

When i turn it on it shuts right back off
Please do the self check this set has:

When the power light comes on and goes out press and hold both the MENU and Input (also called Device) buttons at the same time for at least 5 seconds and then release both buttons.

The power light will blink a two digit error code--for example--2 blinks, a pause and 2 blinks.

Let me know what error code you find and I will tell you what it means and what may actually be the problem.

I am here to help people.

If this information has helped you rate this solution as I do this here for free.

SD TECH
Read full answer
Dec 16, 2009 • Mitsubishi WT-46807 46" Rear Projection...
1helpful
1answer

Does the Mitsubishi WT-46807 need a converter box to receive a HD signal?
Yes, this model only has one HD input--it is the one marked on the back of the set as DTV---you need to hook a box for HD to that input.

SD TECH
Read full answer
Oct 23, 2009 • Mitsubishi WT-46807 46" Rear Projection...
0helpful
1answer

WT 46807 won't stay powered up
i got a 2 puless a pause and 1 pulse?
Read full answer
Sep 29, 2009 • Mitsubishi WT-46807 46" Rear Projection...
2helpful
1answer

Won't stay on for more than a few seconds
Replace Both of your STK ICs big black ICs will have # on them for example STK392-570 Call Mats for Parts 1-800-628-1118
Read full answer
Sep 24, 2009 • Mitsubishi WT-46807 46" Rear Projection...
0helpful
1answer

Loss of convergence on the edges
Yes, first do the self test by pressing input/device button and menu at same time for 5 seconds and read error codes by blinks. more info ctechnicians.com
Read full answer
Jan 01, 2008 • Mitsubishi WS-55809 55" Rear Projection...
0helpful
1answer

Burnout ? wt-46807
There could be a Pip problem or the vertical sweep could have went out also so then the set shuts down the video so it does not burn a line across the tubes. Theres really no way to tell what is wrong or it would just be a guess, a shot in the dark. Call out an authorized repair depot and get an estimate. Good Luck
Read full answer
Oct 29, 2006 • Mitsubishi WT-46807 46" Rear Projection...
Not finding what you are looking for?

View Most Popular

WT-46807 46" Rear Projection Television

  • Televison & Video

Related Question

Audio but no picture mitsubishi wt-46807

  • Mitsubishi WT-46807 46" Rear Projection Television

Related Topics

805 views

Ask a Question

Usually answered in minutes!

Popular Questions

Blinking Green Light on Mitsubishi DLP 52525

Mitsubishi WD-52525 52" Rear...

Tried convergance, but would work

Mitsubishi VS-55609 55" Rear...

Mitsubishi dlp tv WD65733 has white spots, like

Mitsubishi WD-65733 65" HDTV

65'' mitsubishi hdtv white dot on screen problem

Mitsubishi WD-65C9 65" DLP HDTV

What does a blinking orange light on my Mitsubishi

Mitsubishi WD-52531 Television

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
PDF FILES . user-manual-WT-46807...

WT-46807 46" Rear...

PDF Manual
. WT-46807 46" Rear Projection...

WT-46807 46" Rear...

Loading...