My RCA M4303 player will not turn on. Why will it not turn on? Has anyone else had this problem?

jturfle, I had the same problem in the past, all i did is ( uninstaled ) all the components under the name of ( RCA) and ( OPAL ), then (reinstaled) allover. I hope this will help. Sincerely: Ali.

You can load 'suitable' Video files (MPEG4/WMV/AVI) via Internet Explorer in the same manner as for your Audio files but in the appropriate folder(s) on your Player.
If you cannot use EasyRip, there are other 'Video Converters' that could be used to convert your Video fles to your Player supported format.
You can determine what is a 'suitable' video (or Audio for that matter) format by using Windows Explorer 'Properties' for a known files on your player.
Good luck...
dont forget to rate me.....

You can load 'suitable' Video files (MPEG4/WMV/AVI) via Internet Explorer in the same manner as for your Audio files but in the appropriate folder(s) on your Player.
If you cannot use EasyRip, there are other 'Video Converters' that could be used to convert your Video fles to your Player supported format.
You can determine what is a 'suitable' video (or Audio for that matter) format by using Windows Explorer 'Properties' for a known files on your player.

Go to the main setting of your player.Turn power saver off. Also set sceensaver to 1 min.

Update the firmware

The songs may not be in the right format - I have written a whole article about formats in the "Tips & Tricks" section of Fixya if you want more details.

ITS ON HOLD

Try tapping on the screen a bit while it loads.. ive read on other forums that this might work.

turn to the back, there will be a switch that says Off and then the next option is a key. try to switch it to off if .

I had this very same problem. To fix this problem you have to re-flash your RCA MP3 player with the following file: http://download.rca.com/download/RD1022_... My RCA Model RD 1072a as worked fine since flashing the player with this file.