Kitchen Ranges Logo

Related Topics:

Posted on May 31, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a whirlpool built in oven. Model RBD275PDQ8. The display (control panel) went blank 2 months ago. I reset the breaker, nothing. Pushed buttons, it just beeps. 3 days later I pushed the upper oven button and the display came on showing 350 degrees. I pushed the start /enter button and the oven turned on. All was working. I did have to start the clock. A month later, the display went blank again. 4 days later it came back on and the clock time was correct. Then 2 days later it went blank again. This morning for a few minutes it showed the following code: E6 F2. Then it beeped and went blank. I’d like to know what part(s) need to be replaced and the level of difficulty in doing so. I’m pretty handy. Thanks

Answer This Question
  • Anonymous Mar 20, 2013

    E6F2 is a control board failure.  There is a company called FixYourBoard.com that specializes in repairing this failure.  Check out this report of their completed jobs - they are legit! http://news.fixyourboard.com/boards/8302...

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Genius:

An expert who has answered 1,000 questions.

  • Master 3,587 Answers
  • Posted on May 31, 2008
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Genius:

An expert who has answered 1,000 questions.

Joined: Feb 02, 2008
Answers
3587
Questions
29
Helped
1147357
Points
9064

It's the control panel behind that touchpad item. and it's not too difficult, just time consuming. My recommend is to grab a service manual online(usually around 20.00) which will provide good step by step,and also parts list.

spares? well, that's a good question. Until you have that part number, and the best way is to eyeball the one that's in side your unit(no offense to the printers, but mistakes can happen with manuals).

then you'll find out what it's like to be truly handy, eh?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My whirlpool double oven accubake GBD307PDS09 display went blank!!!! HELP!
Hello!
This blank display is a common control board problem. If the buttons beep when pressed, then the control board is getting adequate power. If the buttons beep.. and your oven light still turns on when the oven door is open.. this a text book control board failure. We at Fixyourboard.com can solve this problem for you, and back the remanufacture with a two year warranty. GBD RBD Whirlpool Oven Problems Causes and Solutions
Read full answer
May 03, 2017 • Whirlpool GBD307PD Electric Double Oven
0helpful
2answers

My whirlpool double oven accubake GBD307PDS09 display went blank then beeped. The oven does not turn on but when I tried to turn it on just to test it, it beeped once and then three short beeps. I have...
Hello Diana,
Their are a few things that should be checked. I know its going to be tough to check on a built in double wall oven but one thing that needs to be checked is if their is 240 volts ac entering the oven(i know the breaker is ok) but the connection at the back of the oven can burn,then the proper voltage wont enter the oven.
Another thing is a high limit thermostat thats inside of the control panel,need to checkif it has blown.
Last thing i can think to check is if 120 volts is at the clock, if not 120vac that explains the blank display
Read full answer
Aug 20, 2011 • Whirlpool GBD307PDS Electric Double Oven
0helpful
1answer

Replaced control panel and keypad 1 1/2 years ago seen the error codes now I was self cleaning oven everything went off no error codes or anything house breaker ok PLEASE help.
Self clean is hard on controls. I do not recommend self clean. Kills expensive parts. If the temp goes above 300 in the control panel, a control panel fuse will melt, killing the power to the control.
It looks like this:
themobilian_1783.jpg

Service manual for late model whirlpool double oven and some more interesting oven stuff

themobilian_1784.jpg

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Read full answer
Mar 08, 2011 • Whirlpool GBD307PDS Electric Double Oven
0helpful
1answer

I have a whirlpool electric glass top stove (model # rf364pxpq ). our electricity went out for only a moment, and when it came back on, the control panel is blank and the oven doesnt turn on. the stove top...
I just encountered the same problem. Power surge during storm caused the control panel to go blank. I removed the panel to get the part number. Reinstalled control panel and it started working. Below are the steps 1) Turn off breaker 2) Unplug unit 3) Remove rear panel 4) Unplug all connections to control panel 5) Wait 5-minutes 6) Reconnect all wires in reverse order 7) Install rear panel 8) Plug in unit 9) Switch breaker to on position Control panel came on, set clock and all oven functions worked.
Read full answer
Jan 02, 2011 • Whirlpool Kitchen Ranges
0helpful
1answer

Whirlpool Gold double oven - started beeping then all lights on the control panel went out. Reset the circuit breaker which makes the oven beep but still have no lights. Oven will not operate.
I was just looking over a manual for a late model double oven. Their is a thermal limit going into the controls that will open if the temp rises enough to harm the controls. They look like this one.2605a73.jpg That kills all power to the control and you will see nothing on the display.

This manual will give an idea where to look:

Late model double oven

Helpful? a8ede7a.gif

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Read full answer
Sep 27, 2010 • Whirlpool GBD307PDS Electric Double Oven
0helpful
1answer

Own a Whirlpool Built-In SIngle Electric Oven, one of the following models RDS245 (275, 305) but don't know which one, and probably does not matter. The problem is - Tried the cleaning cycle for this first...
Well you may have blown a fuse in the control panel. If it gets too hot for the controls the fuse melts and kills power so that the controls won't be damaged. 35b1b39.jpg


SERVICE MANUAL FOR WALL OVENS

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Read full answer
Jul 03, 2010 • Whirlpool RBS275PD Electric Single Oven
0helpful
1answer

I have a whirlpool double oven Model #RBD275PDS14, the display is completely off and the oven will not operate. I am told the P/N 8302319 is the problem could this be true display is off too. beeps every...
Good Morning!
An E6-F2 is a very common control board failure. The control board in your appliance will need to be repaired or replaced.

Read more below about common Whirlpool oven Fault codes and what they mean.
GBD RBD Whirlpool Oven Problems Causes and Solutions 8302319 Whirlpool ELECTRONIC OVEN CONTROL CIRCUIT BOARD EOC
Read full answer
May 19, 2017 • Whirlpool GBD277PD Electric Double Oven
1helpful
1answer

Whirlpool electric oven problem
thermal fuse to board blows, relays turn fans off, the thermal cut out on rear of oven kills element. change both fuses, install new style oversized blower.
Read full answer
Sep 22, 2008 • Ovens
2helpful
1answer

"loc" display
This just happened to me. I have whirlpool double oven accubake. The display went blank and i had to turn the breaker off. I left it off for several hours. When I turned the breaker back on my oven display read "Loc" in big letters to the right of the time. I held the start button down for 5 secs. The display went away and the oven started to work as if nothing had happened. I hope that is stays that way.
Read full answer
Dec 08, 2007 • Whirlpool Ovens
0helpful
2answers

Whirlpool Double oven - control panel stopped working
Atlanta...sounds like you may have a power supply problem or the panel is bad. Cut the power, open the unit up and see if there is a fuse in there or a reset. No good? Then replace the circuit board. They just, well, die sometime. Happened to my microwave. Some units may be available remanufactured. Look around on the web.
Read full answer
Dec 06, 2007 • Whirlpool RBD245PRS Stainless Steel Oven
Not finding what you are looking for?

View Most Popular

Kitchen Ranges

Related Question

My whirlpool double oven accubake GBD307PDS09 display went blank!!!! HELP!

  • Whirlpool GBD307PD Electric Double Oven

319 views

Ask a Question

Usually answered in minutes!

Popular Questions

F5E1 error

Whirlpool RF378 Electric Kitchen...

Kitchen Aid KESA907 Error F2E0

Whirlpool GERC4110PS Kitchen Range

Whirlpool range door locked

Whirlpool RF368LXKS Electric Kitchen...

Fan and light not working where is fuse box?

Whirlpool GZ7730XGS Stainless Steel...

Getting a error code F3E2

Whirlpool RF365 Electric Kitchen...

Top Whirlpool Kitchen Ranges Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
GR478LXPQ range manual....

Whirlpool GR478LXP...

PDF Manual
User menu. user-manual-GS563LXSS -...

Whirlpool GS563LXSS...

PDF Manual
Http://www.kitchendirect.com/mediaBase...

Whirlpool RF214LXT...

Loading...