PS3
And XBOX :: BELKIN
Step 1:Connect Modem - Router -
Computer (Wired)
Step 2:Open Router Setup by typing
http://192.168.2.1 on the address bar of internet explorer
Step
3:On the Left click firewall
Step 4:Leave the Password blank and
click submit
Step 5:Disable it and click apply changes
Step
6:Scan and connect in the Xbox/PS3/Wii
Step 7: Get the IP
Address of the Xbox/PS3/Wii
Step 8:Open Router Setup in the
Computer
Step 9:On the left under Firewall Click DMZ
Step
10:Enable the IP Address of the Xbox/PS3/Wii in it
Step 11:Click
Apply Changes
Step 13:On the left Under Utilities click System
settings
Step 14:Scroll down to the bottom
Step 15:Enable
UPnP
Step 16:Click apply changes
Step 17:Test the
connection ,Check the NAT
If working then let me know
==============================================
If
it is still not working
Open Router setup
At the middle
Under internet settings check the WAN IP
IF it starts with
192.168. or 172.16 Then you will have to contact your internet service
and ask them to bridge the modem
313 views
Usually answered in minutes!
Hi danny ,
May i know who is you Internet service provider is?
Hi,
May i know wat is the device in whice it says NAT is strict, eg: xbox , PS3
Thanks & regards
Prema
×