Need pairing codes to pair a motorola bluetooth head set to a verizion phone?

Some headsets need to be set to pair mode to link with your phone. Check the instructions/user manual and if all else fails, try holding buttons on the headset and see if you can get a different reaction out of it.
If you get past that stage and require a code, try 0000, 1234, etc. The book should tell you

Hi,it all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).

Hope it helps..

Thanks for using fixya...

Hi, To pair your motorola headset with phone please go to below website.
http://www.motorola.com/mdirect/demos/how2_h500/h500.html
This website shows you video guide how to pair the head set to phone.
ThankYou

Thanks, the code 0000 for the T305 worked.

Hey notgni35,

Here is a link to the Motorola support site with step by step instruction on how to pair your Blackberry curve to your Bluetooth headset.
If you run into problems or need additional help simply replay again.

Thank you for using Fixya,

ERIC the PHONE GUY



sponsored by Cell Phone Technicians

try to do this.. go to menu, settings, inittial set up, master clear, code (000000) the fone boots w8, then again go to menu, settings, initial set up, master reset, code (000000) fone boots again w8, .. then try to pair it again,.,, goodluck man!

I think that you are usiing an uncompatable headset or your doing it wrong.

How to pair your Bluetooth Head Set:

1. Turn your Bluetooth on, on your phone.
2. Turn your Head-set on.
3. On your phone, in the bluetooth menu; go to "Look for Devices".
4. Your phone should automatically detect the headset and allow you to connect.

Try http://carphonewarehouse.com to see if your bluetooth head set is compatable.

1.Explore blue tooth devices from your motorola phone.
2.it will sure find your blue tooth headset.
3. Make sure your blue tooth headset is on
4.in pairing function select your blue tooth headset

The V3C cant pair with other phones.. I have to hold my bluetooth head set on top of my phone to get it to pair sometimes and make sure the headset is in pairing mode

Press the all-in-one button for about 8 seconds until the light is constantly on, this puts it in pairing mode. then go to your device and initiate pairing. the device code is 0000.

When done the blue light should shut down, and your all set.