Just purchased a LG420G phone. Can you please explain to me how to reset the time / date to the current day, etc. I have gone to settings and cannot figure how to change time and date

Remove the battery for 20 mins. replace the battery.turn on and go to the camera's Menu scroll through the settings to the Date & Time, set the current date and time.

1. Tap Menu > Settings > Phone
2. Tap Time & Date.
3. Tap Time Format, Date Format or Auto Update > Save

It's best to keep it set to Auto Update so that it takes the network time and updates for DST changes.

Hope this helps. If so, please consider rating this solution.

-best regards,
M

This is what I did to set time on lg420g:
-turn off phone
-remove battery for a little while
-put in battery and turn on.

You can't set the time manually in any settings.
It does it automatically.

Same thing happened to me on one of the phones but if you go into display setup you can choose the wallpaper with time and date showing or without. You need to choose the - with time showing on each phone individually.

To change the time on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #55 the screen should say YYMMDDWHHMM
3) enter in the year, month, day, day of the week, hours and minutes(the day of the week values are 1= mon. 2= tues. etc.)
press # when finished.

Hi garysuzie,

To set the digital time and date on your Timex, please follow the steps below.

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.

solution 1:
please try to set the date properly.that is current date,
solution 2:
restore your phone using this code *#7780# reset to factory settings.

hi
please tell which handset you are using?

generally you can do it by going to clock /options/settings/time

Hope this helps

if system DK series must set at port "00"
#402 to check the port number with displayed phone
#651 DDMMYY - for date
#652 HHMMSS - for time
#653 to change the day

The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default values.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time and date (Menu 9.1)
Use this menu to set the current time and date on
your phone.
• Home zone: set the home time zone. Select the
city that corresponds to your home zone. To set
daylight saving time, select Set daylight saving
time.
• Time: enter the current time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select the time format.
• Date: enter the current date.
• Date format: select the date format.
• Auto update: activate the auto time update
feature. Your phone will read the MCC (Mobile
Country Code) from the network and automatically
update the current time for the country that you
are in when you travel abroad.