How can I install an Epson Scanner 1660 Perfection without the CD-Rom which is lost?

1,Download and install the latest driver for EPSON Perfection 1200.(TWAIN Driver v5.53A)> http://www.epson.com/cgi-bin/Store/support/

Note:The scanner must be disconnected from computer during the installation of this driver.
2.Next download and install Epson Scan! II 32 Utility v2.35E

The following link has all the original driver and creativity software.
Epson Perfection 2480 Drivers Software

If you need further help, I’m available over the phone at https://www.6ya.com/expert/alex_22751bbefa74c3d0

Check if the plug is loose. Also check if there is power coming into the plug-point you are using.

Hi, try to download it here: http://driverscollection.com/?H=Perfection%201660&By=Epson

you want to go into the error count menu on the printer and reset after you have corected whatever caused the malfunction

http://shop.ebay.com/?_from=R40&_trksid=p3907.m570.l1313&_nkw=Epson+Perfection+1660+scanner+power+adapter&_sacat=See-All-Categories
you can not get any cheaper than this...
please do not forget to rate if this was helpful...
have a good day !

Try going to the Epson website and search for your model number scanner and download and install the drivers.Check for the system requirements to make sure the drivers are compatible for win 7 though.Hope this works. Ken

Log on to support.epson.com to get the drivers for your scanner.
Here is the link:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14549&prodoid=54582&infoType=Downloads&platform=Windows&BV_UseBVCookie=yes

Just choose which driver is compatible with your operating system.

Vista x64 and Windows 7 x64 driver for Epson 1660 scanner is found here:

http://www.vistax64.com/drivers/185132-unofficial-drivers-epson-perfection-1660-scanner.html

The Epson scanner (about 8 yrs old) doesn't shut off when attached to an iMac w/the Leopard operating system.  To "solve" the problem I bought a small desktop Canon LIDE 90 scanner that runs on 2.5 watts of power and uses 1 watt on standby mode.  It appears that they all need to be unplugged to shut down the power.