Keeps showing err. Thinner scale - Conair Thinner Scale by TH304 Glass Body Fat and Hydration Analysis Scale

SOURCE: Err 1 message on Taylor Lithium Elec Scale model 7346

This is a reply I received from Taylor customer support. I have followed this procedure enough times to wear out the original battery and still get the Err 1 message. You may have better luck.

Thank you for your e-mail. The reboot below may clear the error from
your scale. You may need to do this several times to completely reboot
the system. Please let us know if you have any questions or continue to
display the Error.


1. Remove the battery from the scale
2. Set the scale on the floor without the battery in place.
3. Stand on the scale for 10 seconds (still without the battery)
4. Carefully replace the battery without turning the scale on.
5. Using only one foot, tap the scale or apply just enough pressure to
turn on the display. (It should show dashes or zero's) IMMEDIATELY
REMOVE YOUR FOOT.
6. Let the scale turn off
7. Step on the scale for a weight reading


Regards,


Linda DLT
Consumer Relations
Taylor Precision Products
& Salter Housewares
2220 Entrada del Sol, Suite A
Las Cruces, NM 88001
Toll free - 800-289-0944
866-843-3905
Direct - 575-526-0944 ext 3172

SOURCE: Conair thinner scale model TH402 displaying incorrect weight?

Conair TH402 displayes incorrect weight

SOURCE: HealthSmart bathroom scale displays "Err"

Put scale in round file can. Buy another cheap scale.

Testimonial: "The new scale works great and was on sale at Wal-mart for only $29."