Philips 55" hdtv rear projection internal parts

Thats the DP310 chassis. You can get the replacement CRTs from www.tvrepairworld.com there are three , Red, Blue and Green specify which color youre needing.

that input is called DVI digital video interface it is only for video. there should be some red and white composite input jacks for the audio near the DVI connector. you will need to hookup the red and white cables from the tv to the cable box or dvd player or whatver you are using. good luck

Ur convergence it dead,Need a convergence kit,use what in that kit,Know how to solder righht?Tries Tv Repair World.com,Ebay.com.

Common problem with this model. Goto www.TvRepairKits.com and get their instructions on how to fix it.

Number is on your STKs in TV Two big black ICs STK392-110s 150s, use 180s For Parts Electronix 1-800-223-3205 As for sound replace microboard has #P on it.

i have a manual and can send it via email

OK, friends.. Replace two Ic's Stk 392-110, and get in service menu settings , and adjust point by point. After replaced stk IC's, check if any resistor look brown or born, if yes, replaced it with 6.8 Ohms.SOme time SSB is defective ( small signal board, replaced it ) If you have questions? [email protected] . Good Luck !!

OK, where to purchase the is focus box? Part number 54945198.
It is not at the philips store. Help!

When it is on, do you see any distortion in color?  If not probably bad power supply board. Call 1-800-543-4330 and have model and chassis number and ask for Power supply/deflection board. Only about 200.00

change the convergence ICs also check the resistors right next to the ICs as 1 or 2 of them may be open as well.