Is there any reset codes for a samsung LNT405HA

Master Reset : *2767*3855#


[email protected]

Mast reset is different from unlocking code..Unlocking code will release the network lock..And master reset , reset your mobile if you forget your security code..
If you want to use your mobile with other network means, you have to unlock it..It can be done through codes..If you need get the code from http://www.prounlocking.com/ .It helps to unlock your Samsung M3510 beat easily.

U can try this code *2767*3855# it will clear your phone memory completely. Reset your password to default also. But i'm not fully sure about working on this model also. But please be careful about ur phone data, before entering this code.

*#06# Show IMEI
*#9999# Show mobile Software Version
*#0837# Show mobile Software Version (instructions)
*#0001# Show Serial Parameters
*#9125# Activates the smiley when charging
*#0523# LCD Contrast
samsung mobiles

*#9998*228# Battery status (capacity, voltage, temperature)
*#9998*246# Program status
*#9998*289# Change Alarm Buzzer Frequency
*#9998*324# Debug Screens
*#9998*364# Watchdog
*#9998*377# EEPROM Error Stack - Use side keys to select values
*#9998*427# Trace Watchdog
*#9998*523# Change LCD contrast
*#9998*544# Jig detect
*#9998*636# Memory status
*#9998*746# SIM File Size
*#9998*778# SIM Service Table
*#9998*785# RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error

*#9998*786# Run, Last UP, Last DOWN
*#9998*837# Mobile Software Version
*#9998*842# Test ******** - Flash the screenlight during 10 sec and vibration activated

*#9998*862# Vocoder Reg - Normal, Earphone or Carkit
*#9998*872# Diag
*#9998*947# Reset On Fatal Error
*#9998*999# Last/Chk

*#9998*9266# Yann debug screen (Debug Screens?)
*#9998*9999# Software version

*0001*s*f*t# Changes serial parameters (s=?, f=0.1, t=0.1)
*0002*?# unknown Samsung's comand
*0003*?# unknown Samsung's comand

For Mobile phones SGH (R210, T100, A300...)
if Samsung code is in format *#9998*xxx#
try write in this *#0xxx#

SGH-600
SGH-2100

*2767*3855# Full EEPROM Reset (THIS CODE REMMOVES SP-LOCK! but also changes IMEI to 447967-89-400044-0

*2767*2878# Custom EEPROM Reset

Samsung mobile phone codes: Samsung E700

*2767*688# remove USER CODE and SIMLOCK

Samsung mobile phone codes: Samsung V200

Unlocking:
Power on the mobile phone without SIM card and type these codes:

*2767*63342# and press green button
*2767*3855# and press green button
*2767*2878# and press green button
*2767*927# and press green button
*2767*7822573738# press button

Phone will be unlocked, but all trims are reseted !!!
Mobile phone must be fully charged

Samsung mobile phone codes: Samsung S500
Unlocking
*2767*MVT# (*2767*688#) E2P MVT Reset
*#SIMLOCK# (*#7465625#

Hi there, if 1234 and 0000 are not work try code *2767*3855#
If fail, please visit below websites : www.muskurahat.us/mobile/samsung_tricks_and_tips.asp
www.ehow.com > Electronics > Cell Phones > Reset Phone
forum.gsmhosting.com/vbb/f200/all-samsung-hard-reset-codes-588846/
www.unlock-zone.com
jay--jankjuh88

eight zeros "00000000"

the code is the last 4 digits in phone #

Hi i'm Rain.
The code that your looking for would be the factory reset code.
that is the only code to reset a Samsung Glyde mobile phone
{Note a factory reset will reset all data and erase personal info.
if your able you should save all personal files and numbers.
The code is. Press

*2767*3855# followed by #*7337#

Reboot phone and password will be reset.
I hope this information has been helpful.

You can enter the hard reset code but that will delete everything on the phone the code is *2767*3855# i haven't been able to find the password reset for the F480.
The default password for the Samsung F480 is 12345678.