Need a manual for a Konica srx-101a film processor please

Error code C-3151 on a Konica Minolta C8000 printer indicates a "Fixing Film Transport Motor Lock Problem." This error typically occurs when the flexing film is stuck or there is a problem in the film transport module. In order to fix the issue, the printer should be opened up and the fixing film should be checked for any obstructions. If the issue persists, the motor unit and flexing film may need to be replaced.

You may download a copy of the manual here.

You may download a copy of the manual here.

Here's a link where you can obtain an instruction manual for the X-ray film processor, directly from the manufacturer.

https://wwws.konicaminolta.net/neoqa/gl/healthcare/input.php

Press the DATE button on the back of the camera to cycle through date, time, and none (just dashes). Press the shutter release button to set the format.

If you need a manual, you can download one at
http://ca.konicaminolta.com/support/manuals/film-cameras/film_af_slr/dynax_4/2164_E_B.pdf

You can download it for free. Its a pdf file so you will also need a version of Adobe Reader which you can also get free at the Adobe website. Here's the website address for your Maxxum 5 manual.
http://ca.konicaminolta.com/support/manuals/film-cameras/film_af_slr/index.html

If that does not work, look up Konica Minolta in a web search. Click on the Konica Minolta Canada. In the lower right of the screen click on info about cameras, then find your way to the manuals.

Then add fresh CR2 batteries, film and go play!!!

This is an ASP film camera. Film is no longer made, there is outdated film available, but there is no guarantee it is good. There are only 2 places that will process the film in the US anymore.
I would get another film camera.

http://www.amazon.com/Konica-Minolta-Zoom-130c-Camera/dp/B0000C4JZV After opening this page look under product description. Click on "Product manual" and it will open up the manual for you for free.

I had the same problem. I think I finally figured it out. My problem was that the Shutter was in lock mode. In the manual book there is a section called "Shutter Lock." How to get it unlocked: While pressing the drive mode button (1), turn the camer on with the function dial (2); the data panel displays the status of the shutter lock. If it says "lock", you will need to do this process again to get it unlocked.

To find out where the buttons are, you will need to look in your manual -- page 53.

Hope this corrects your problem.