I get no link to base when I try to use the handset.When I first remove from base,I get readythen when I push talk button,I get no link to base-Also no dial tone on handset---Base works good.
I also have GE phone model GE 26936GE1-C and cannot get the base to link with the handset. I have changed the battery, re-booted the phone. Tried every button on the darn thing and UGH not a thing. Can you help please.
Thanks!!
THE BASE AN HANSET WORKS. BUT WHEN I TRY TO DIAL GIVEME THE MESSAGE OF NO LINK TO BASE.
I TEST THE POWER SUPPLY AND THIS GIVE ME 18 V INSTEAD OF 12 V-. SO I HOPE THE SOLUCION IS RIGHT THERE, REPLACE THE POWER SUPPLY AND HOPE THAT NOTHIG IS BROKEN INSIDE THERE.THE BASE AN HANSET WORKS. BUT WHEN I TRY TO DIAL GIVEME THE MESSAGE OF NO LINK TO BASE.
I TEST THE POWER SUPPLY AND THIS GIVE ME 18 V INSTEAD OF 12 V-. SO I HOPE THE SOLUCION IS RIGHT THERE, REPLACE THE POWER SUPPLY AND HOPE THAT NOTHIG IS BROKEN INSIDE THERE.
I get no link to base when I try to use the handset.When I first remove from base,I get readythen when I push talk button,I get no link to base-Also no dial tone on handset---Base works good. I also have GE phone model GE 26936GE1-C and cannot get the base to link with the handset. I have changed the battery, re-booted the phone. Tried every button on the darn thing and UGH not a thing. Can you help please. Thanks!!I get no link to base when I try to use the handset.When I first remove from base,I get readythen when I push talk button,I get no link to base-Also no dial tone on handset---Base works good. I also have GE phone model GE 26936GE1-C and cannot get the base to link with the handset. I have changed the battery, re-booted the phone. Tried every button on the darn thing and UGH not a thing. Can you help please. Thanks!!
AnonymousApr 20, 2009
I have the same problem with a GE 900mhz 26936GE2-B phone.
No dial tone when removed from base. If I try to dial I get "No Link to Base". On the base, there is a small number 3 in the bottom right corner of the display. Any thoughts?
I have the same problem with a GE 900mhz 26936GE2-B phone.
No dial tone when removed from base. If I try to dial I get "No Link to Base". On the base, there is a small number 3 in the bottom right corner of the display. Any thoughts?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you mean you'd like to add another handset to the base unit on this phone, I'm afraid you can't. This isn't a multi-handset phone and isn't expandable. If you want the kind of system that has the main base unit and several separate handsets, you'll have to start fresh with a new system. They aren't expensive.
Unfortunately that is the untold story about cordless phones they only have the capability of 1 open line be it the handset or or the base. There are some very pricey multi line systems, I have the same system bought two extra handsets and found out too late that I can only use them one at a time! Sorry probably not the answer you were looking for but thats the reality...
Press MENU, scroll down to INITIAL SETTINGS (press select), scroll down to REGISTRATION (press select), then select HS REGISTRATION, and follow the instructions on the handset screen. This is for the KX-TG6071B, but is similar for most Panasonic Cordless phones. That will link the handset to the base, and YOU MUST DO IT WITH EACH HANDSET.
Sounds like a defective battery or low battery.
1. Have you replaced the battery?
2. Have you changed the channel?
3. Have you dropped it?
Answer these few questions and we'll see if we can figure it out.
Let me know.
I
was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the
AC and phone cord from the base station and plugging both back it, then removing and replacing
the handset to regenerate the security code.
The additional handset and the base need to "pair" first. Put the handset in the base cradle till you see the red light blinking. That's when they are paired.
I have the problem. I think it is because the battery i have in it was a Ni-MH and it should be a Ni-Cd. I am now looking for the right baterry Good luck Frank [email protected]
2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.
THE BASE AN HANSET WORKS. BUT WHEN I TRY TO DIAL GIVEME THE MESSAGE OF NO LINK TO BASE.
I TEST THE POWER SUPPLY AND THIS GIVE ME 18 V INSTEAD OF 12 V-. SO I HOPE THE SOLUCION IS RIGHT THERE, REPLACE THE POWER SUPPLY AND HOPE THAT NOTHIG IS BROKEN INSIDE THERE.
I get no link to base when I try to use the handset.When I first remove from base,I get readythen when I push talk button,I get no link to base-Also no dial tone on handset---Base works good. I also have GE phone model GE 26936GE1-C and cannot get the base to link with the handset. I have changed the battery, re-booted the phone. Tried every button on the darn thing and UGH not a thing. Can you help please.
Thanks!!
I have the same problem with a GE 900mhz 26936GE2-B phone.
No dial tone when removed from base. If I try to dial I get "No Link to Base". On the base, there is a small number 3 in the bottom right corner of the display. Any thoughts?
×