Is there a way to display the time on the VIN4100 screen?

1. Begin on the main sales screen
2. Press the purple MORE key twice
3. Choose OTHER SET UP from the display screen
4. Type in your password if applicable
5. Press the purple MORE key until the display reads SET DATE/TIME
6. Choose SET DATE/TIME from the display screen
7. Type in the date mm/dd/yyyy
8. Type in the time HH:MM:SS in Military Time
9. Press ENTER
10. Press the red CANCEL key

Setting the Time Zone

1 Access Time Zone.

If you are unsure how to use this route map refer to Accessing Menu Items on

page 3-3.

2 Press arrow keys to select the time zone that you are in.

3 Press Enter. The message display shows Completed and returns to the Date/

Timer Set. screen.
4 Press right Select. The message display returns to the basic screen.

NOTE: Periodically check the time that is shown in the message display and adjust

as necessary to match the current time.

1 Access Year/Time.

If you are unsure how to use this route map refer to Accessing Menu Items on

page 3-3.

2 To set the date, for each field press arrow keys as many times as necessary to

display the correct value then press arrow keys to move to the next field.

3 When the date is correct, press Enter. The time setting screen

(hour:minute:second) is displayed.

4 To set the time, for each field press arrow keys as many times as necessary to

display the correct value then press arrow keys to move to the next field.

5 Press Enter. The message display shows Completed and returns to the Date/

Timer Set. screen.
6 Press right Select. The message display returns to the basic screen.

1. Press the "Fax Mode" button.
2. Press the "Menu" button. The "Fax Menu" screen will be displayed.
3. Press the down arrow button 9 times until the screen displays "Maintenance."
4. Press the "Select" button. The screen will now display the Maintenance Menu.
5. Press down arrow button 4 times until the screen displays "Restore Defaults."
6. Press the "Select" button and a new screen will pop up. "Are you sure
   that you want to reset default settings to their factory settings?
7. Press 1. A new screen will pop up that says the factory settings have been restored.

Select the system settings from the main menu, then you select the time format, set the time to the proper time, there is an option to display the time from the settings. Once you select the display time it will display time on the home screen of the device.
Hope this helped. Thank you for using fixya.

first u set duel display option in system display properties and try it may ok

1st the LCD must have Time settings,and Teletext incorporated then press a remote control key to have time displayed, and config the LCD menu for clock always visible.

check the display iC or what we called crystal IC

try tacing bat and sim card if it has one off wait 2 min and put back together then power it up

First, to verify if it is your display adapter, connect an external monitor to your laptop and see if it displays fine. If it is fine on the monitor, then we know that it is from your laptop screen(in this case, it is either you first check from a technician if it is the colour that has to be refilled or if you need to purchase a new screen). If not then it is from your display adapter(could be from corrupt display drivers). In this case, you would have to re-install new drivers for your display adapter(you can download it from your system manufacturer's website if you don't already have it).
Thanks

1. From the Standby Mode, press the [Menu] (up arrow) button, then press [4], [2]. The screen will display: Date.
   [01-31-2000]
2. Use the numeric keypad to enter the date and the arrow buttons to move between the fields, then press [Enter]. The screen will display:Date format.
   1. MM-DD-YYYY
   2. DD-MM-YYYY
   3. YYYY-MM-DD
3. Use the numeric keypad to designate the Date format you require to use. The screen will display: Month format.
   1. Numeric: displays the month with a number
   2. Name: displays an abbreviated month name.
4. Use the numeric keypad to designate the Month format you require to use. The screen will display: Time format?
   1. 24 hour
   2. 12 hour
5. Use the numeric keypad to designate the time format you require to use. The screen will display: Time.
   10:30 pm (or 22:30 pm if you chose the 24 hour format).
6. Use the numeric keypad to enter the time and the arrow buttons to select [AM] or [PM], then press [Enter].
7. Press [Exit] or [Stop] when the menu selection screen displays to return to the Standby Mode.