push power button tv power light blinks on/off for sometimes up to 30 minutes then turns off.Turn it back on and it blinks again for a few mintes, then shuts off. Turn it back on it shuts off quick, turn it back on and it shuts off yet again then turn it on and it finally stays on. I do not get a screen until it finally stays on.push power button tv power light blinks on/off for sometimes up to 30 minutes then turns off.Turn it back on and it blinks again for a few mintes, then shuts off. Turn it back on it shuts off quick, turn it back on and it shuts off yet again then turn it on and it finally stays on. I do not get a screen until it finally stays on.
You can't post conmments that contain an email address.
It is the low voltage power supply. I just had my set repaired and it had the same symptoms. My set is out of warranty. The repair cost is around $200.00.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
how many times does it blink red. the will help determine whats wrong. Most lightly its going to give you 6 or 7 blinks whick points to the power supply this is sometimes a false indication to the ssb/signal board being bad. you coulb try the parts or have a tech come out and verify which is the problem.
Capacitors tend to pop when they fail. Phillips LCD TVs have lots of problems with capacitor failures in their power supplies. I've got my 37mf231d apart on my workbench as we speak. Mine makes a whistling sound which I believe is either a solder fault or a bad capacitor.
A new power supply board is about $150 for that TV. The gamble, of course, is if the power supply took out something else when it failed.
I had the same thing - one long red flash followed by four short red flashes. Plugging and unplugging the power cord had no affect until I also unplugged all the cabled connections to the VCR and DVD player as well. Also, per the manufacturer's instructions, I unplugged the power cord from the surge protector and plugged it into the main wall outlet (which I tried first, but did not finally have success until I cycled the power cord unplugging process with all the cabled connections to the auxilliary devices unplugged as well).
call a tech let them check your tv if no power it will be the power supply or related circuits.if you have sound then it could be video circuit module.as you said that it dont have pictures you did not mention anything about sound.good luck
push power button tv power light blinks on/off for sometimes up to 30 minutes then turns off.Turn it back on and it blinks again for a few mintes, then shuts off. Turn it back on it shuts off quick, turn it back on and it shuts off yet again then turn it on and it finally stays on. I do not get a screen until it finally stays on.
×