Who can give me a link where I can find 3200ls updates? I cant find in parrot website
hi ,maybe anybody has 3200sl update bin file? my unit is working with 2.03 version and I need updates,but parrot web is dead,so if somebody has it could you send to my mail:[email protected] thank you
×
SOURCE: can i reset my parrot back to factory settings
yes you can do this by going into settings then scroll all the way down to the bottom and select factory settings the push the middle button in. then push the green button for yes.
SOURCE: Problem transferring contact list from BB 8330 to Parrot 3200 LS
Hello,
I had the same issue with my Nokia phone a long time ago. To solve that issue I had to upgrade the Parrot's firmware with the laptop through bluetooth connection while in the car. I have done this a few times to get the most out of my parrot.
I recently got a Blackberry and had no issues with the contacts whatsoever. I do have to say that I dont have 500 contacts, but only 130.
If I were you I would try to update the Parrots firmware to the latest one available in the parrots website.
I am not sure if the parrots has a maximum contacts restriction. That might be also your problem.
Hope it helped.
Testimonial: "Thank you. I shall take your advice and upgrade the firmware. When (if?) I'm successful, I'll post my experiences."
SOURCE: my nokia 2330 classic doesnt pair with my parrot
Hi,
It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.
When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.
After pairing both device, you detected paired, you can now use the blue tooth device with your phone.
there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).
Take care.
SOURCE: how do i pair my
Hi,
The first
time that you switch on the 3200 LS-Color, you must pair your mobile phone
with the kit. 1.Enable the
Bluetooth mode on your phone. 2.On the
hands-free kit, scroll through the menus until you come to Settings Pair with
phone and select the relevant option for your phone. A 4-digit PIN code then
appears on screen. Memorize it. 3.Then from
mobile serach the 3200 LS-Color device Once the
search has finished, "Parrot 3200LS / Parrot 3400LS" is displayed on
your phone. 4.Select the
kit. Your phone prompts you to enter a code: key in the code shown on the
kit screen and confirm on your phone. 5.The kit's
screen displays "Pairing". 6.Once the
data has been exchanged, "pairing successful" appears on the 3200
LS-Color.
Thank You
SOURCE: I have just bought a new apple I phone 4. I can
remove all the previous paired phones from the parrot memory and then try again. if this dont work then you will need to have the software of the parrot updated. You can do this yourself but you will need a laptop with bluetooth. then download the software from parrot web site.
The first
time that you switch on the 3200 LS-Color, you must pair your mobile phone
with the kit.
1.Enable the
Bluetooth mode on your phone.
2.On the
hands-free kit, scroll through the menus until you come to Settings Pair with
phone and select the relevant option for your phone. A 4-digit PIN code then
appears on screen. Memorize it.
3.Then from
mobile serach the 3200 LS-Color device
Once the
search has finished, "Parrot 3200LS / Parrot 3400LS" is displayed on
your phone.
4.Select the
kit. Your phone prompts you to enter a code: key in the code shown on the
kit screen and confirm on your phone.
5.The kit's
screen displays "Pairing".
6.Once the
data has been exchanged, "pairing successful" appears on the 3200
LS-Color.
Thank You
13,895 views
Usually answered in minutes!
×