I NEED A BELT FOR A RICCOR 8900..............................PART NUMBER A20-R2 CAN YOU TELL ME WHICH ONE I NEED.....................THANK'S CRISTA HARDIN

Is that the correct model number?

EC-02BU3 this is the belt number you can get at amazon.com

Start by replacing the belt and make sure the clutch switch is in the correct position. If that doesn't solve it you should check the clutch in the brush roll to see if it is worn.

Hi there, it's Jack at Dyson.

From the serial number provided your vacuum is a Dyson DC14 Origin. For guidance on replacing the belt, you're welcome to give our experts a call freephone on 0800 298 0298. They'll be happy to talk you through it.

Just to let you know, calls to the Dyson Helpline are free from UK landlines, and we're available 8am-8pm from Monday to Friday, and 8am-6pm on weekends.

Usually belts do not come off unless something is worn. If your
Riccar is used heavily or is over 5-10 old (depending on use) it may have a worn pivot point or motor mount. Both are inexpensive parts that will wear after years of use. If your belt is over 6-12 months old it may have lost elasticity. The brush roll end cap must be installed in the proper position and the clutch activation lever must be installed properly to work properly. You have a very durable long lasting vacuum but it does need occasional service to work properly. It may save money in the long run to have it serviced by your dealer if it's been a while.

Sorry folks, but there's no Eureka with this model no. The model number can be found on a sticker, usually on the bottom of the unit. We'll need the correct model to access schematics of the body so I can tell you how to access the belts.

see this next web and proceed according:

http://www.ehow.com/how_4761328_change-belt-vacuum-cleaner.html

God bless you

good day!!

just look at the code or number at the side for example (A20) when you order or buy it that is the one you can say or find..

thank you

Your vacuum is not self propelled. It is most. Likely something was not put back together properly when installing the new belt.

Need to know if it is a Electrolux or a Hoover and the model number.