Just replaced all my ink and it tell me no ink in magenta.

Enter printer model on www.hp.com/us or country code.

Try removing, and then reseating the MAGENTA cartridge.

If you replace the MAGENTA toner-cartridge, does the problem go away?

buy a new one srry man if u eney thing els tell me at [email protected]

Try replacing the cartridges one by one, one at a time to find out which cartridge is causing this problem. May be there is a magenta chip on one of the othercartridges.

The ink should come out of the cart. if not the cart is the problem at this point try anothere magenta if that does not shore it up then you need to then start looking at the print head where it goes it itself now the store you bought the ink from will give you a replacement no questions asked sometimes even if you dont got the reciept. Try those steps you be glad you did.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

This problem needs to be addressed by an Epson service center. It needs disassembled and probably needs parts replaced that the leaking ink damaged. Sorry.

My canon pixma i4300 is telling me that an ink cartridge needs to be replaced- I open the cover and the magenta cartridge is blinking- so I uninstall it - it is full of ink - I reinstall it it stops blinking but the minute I put the cover back down I get the same error- Whatsup?

Hi
What i can recommend is call epson and tell them about this issue and for sure they are going to replace the ink and will run diagnostic test on your printer- here is there support line number 562-276-1300

you have to go int the ink leval thing i think and tell it you installed a new ink cartrige that should fix it

Try removing the magenta completely and shut the lid then open again then insert the new magenta and see if the ink device level on the PC shows full. Sounds like the system needs resetting. Alternatively change the magenta and power on and off the printer and see if this resets it.